Digital satellite receiver dre 7300. Equipment for digital television - this is what you can buy in our store. Software update from a computer

It is difficult to imagine modern residents without the Internet, mobile communications and, of course, satellite television. Since digital TV is quite in demand today, a large number of companies provide such a service. However, quality is important to Russians, so they prefer Tricolor TV. It is this provider of digital television broadcasting that has the largest viewership.

By becoming a subscriber of Tricolor TV, residents of Russia get access to many channels on a wide variety of topics. The operator has taken care to provide relevant content to both adults and children. For example, the "Children's" package will appeal to any kid, and parents will not miss the opportunity to enjoy bright and interesting cartoons, fairy tales, educational programs. Sports fans and lovers of erotica will also be satisfied - there are channels of this genre for them.

Activation of the "Single" service is an opportunity to watch more than 200 TV channels of a musical, informational, entertainment nature, as well as all kinds of films, series and much more.

However, it is worth remembering that by connecting the package, it is necessary to renew its validity in a timely manner. Only in this way will you have access to all channels included in the service. It is easy to do this - you just need to choose a convenient payment method. And Tricolor TV has plenty of them. How to pay for Tricolor?

First of all, specify the ID of the receiving equipment, because without it it will not be possible to make a payment. This number can be found in the "Status" section (select from the menu).

And now more about payment methods:

Credit card holders can pay for Tricolor with a bank card(the card must belong to the partner bank of the TV provider)
You can pay for the package at any postal and banking branch of Russia (the bank must cooperate with the operator)
On sale there are special payment cards - scratch cards. It is enough to enter a certain code and the service will be extended
One of the ways is electronic payment systems - Yandex.Money, WebMoney, QIWI, etc. That is, it is possible Tricolor payment via the Internet. You will need to have the required amount on your e-wallet (some systems charge a fee - keep this in mind)
Today, many subscribers use Internet banking to deposit money ( Tricolor payment online) - it's fast, convenient and you don't need to leave your home
Almost every small shop, not to mention supermarkets, etc., has payment terminals. We find the appropriate section, enter the necessary information and deposit cash
You can pay for Tricolor TV packages at Euroset, Svyaznoy and other communication stores
You can transfer the required amount from your mobile phone account

It should not be forgotten that when tricolor payment, Personal Area also good for this. Each subscriber has his own account with funds (optional). If the required amount is available, then you can use this method.

If you want to always have access to all channels included in the connected service, do not forget to renew it in time. Otherwise, at one point you will not be able to watch your favorite shows or movies.

Digital satellite receiver DRE-7300 is designed for viewing Tricolor TV programs. The device is equipped with a built-in DRE Crypt conditional access system and fully supports all programs and services broadcast in the accessible DVB-S/MPEG2 format. The DRE-7300 is produced in Russia by the well-known corporation General Satellite in the satellite market.
On the front panel of the device there is a four-digit display that shows the channel number, download indication or time, depending on the mode. Very useful for the user is the presence of an indicator of the presence of a signal from the receiving converter on the front panel of the satellite receiver. For the convenience of the owners, the main control buttons are also displayed on the front side of the DRE-7300.

GS-7300 receiver Tricolor TV

The receiver can be connected to the TV via RCA, SCART connectors, or to the antenna input, via the modulated RF OUT output. The sound from the unit can be input to the digital audio system via the S/PDIF interface. And the software is installed using the RS-232 connector.
The menu of the digital satellite receiver DRE-7300 is organized similarly to the previous devices. There is a convenient sorting of TV channels. The output of the TV program, teletext and subtitles - complements the list of advantages of the GS-7300. In addition, the device works correctly with external DiSEqC and USALS devices. And for the smallest users, the satellite receiver is even equipped with built-in games.

remote receiver GS-7300

Main characteristics of DRE-7300:

Full support for DVB-S/MPEG2 broadcast format
Slot for CA modules
Operational network search for channels
RF modulator with channel selection
The device is compatible with DiSEqC 1.0, 1.1, 1.2, USALS protocols
Built-in timer
Ability to edit the list of TV channels

The satellite receiver DRE-7300 (GS-7300) does not support the reception of an extended package of TV channels, which is transmitted in the DVB-S2/MPEG4 format. Currently, instead of this device, more modern ones are used to receive Tricolor transmissions.

The General Satellite DRE-7300 satellite receiver is a digital satellite receiver designed to be able to view the operator's program package from the Eutelsat W4 satellite. The GS DRE-7300 receiver is a complete copy of the Digi Raum Electronics DRE-5000 set-top box. The only existing difference is that the GS DRE-7300 receiver is assembled by General Satellite, which operates in Russia. The DRE-7300 terminal has an STI 5518 chip, which can be used to perform basic digital MPEG-2 signal processing functions. Also, the set-top box is equipped with a hardware-software decoder of the DRECrypt conditional access system and a DVB CI interface.

The DRE-7300 prefix has a silver-colored metal case. The case size is 300x170x40 mm. The front panel is equipped with a four-digit yellow-orange segment display. In the operating mode, the display shows the channel number that is currently being watched. Standby mode displays the current time. The display is equipped with additional pictogram segments that indicate the signal on the selected TV channel. It also indicates the transition to the reception of any radio channel and whether the terminal is in standby mode. The main control buttons, which are located on the front panel, greatly facilitate the work with the receiver. The control system is represented by buttons for switching channels, transferring the set-top box from one mode to another, and a TV / R switching button.

On the right side of the front panel there is an opening cover behind which the user can find a standard Common Interface connector. This connector is used for the Viaccess module and other access systems.

The remote control is multifunctional. With it, you can control the device, being at a distance of 8 to 10 meters.

The DRE-7300 tuner has the following specifications:

One CI slot
Chip STi 5518
Z-Crypt decoding module (Dre-Crypt, DRECrypt)
Compatible with USALS, DiSEqC 1.0, DiSEqC 1.2, DiSEqC 1.1, DiSEqC 2.0
Memory for 5000 TV and radio channels
Electronic guide EPG
Complete and fast search for TV channels
7 Day TV Guide EPG
Aspect Ratio 4:3, 16:9
Subtitle support in DVB and TXT modes
32 favorite lists
Multilingual menu
Size: 300 x 170 x 40mm
Receiver Quick Installation Navigator
Weight (about): 1.3 kg.

The rear panel of the DRE7300 is equipped with an LNB IN RF tuner input and LNB OUT loop output, AUDIO R/L analog RCA audio output, VIDEO composite RCA video output, two Scart connectors (S-Video, RGB, stereo, YPrPb, CVBS). It has a power switch, an RS232 port for connecting to another receiver or computer, and an optical S/PDIF digital audio output.

Equipment for digital television- this is what you can buy in our store. Our company operates on the market of essential and satellite equipment Since 2003, we already know most of our customers by sight.
For regular customers of our online store there is a system of discounts, which is calculated automatically according to the coupon number assigned to you personally.
All equipment undergoes pre-sale preparation, namely, it is installed latest version Software for satellite and terrestrial set-top boxes. All receivers are tested for performance.
Our company delivers equipment, both in Moscow and throughout Russia. Most courier companies have agreements for reduced shipping rates.
In our online store you can find almost any equipment that you may need to receive satellite and terrestrial television. We tried to make the ordering process convenient for anyone. If you plan to order more than one item, but several, then you can use the search in the store and pay attention to related equipment. If you want to pick up equipment for receiving satellite TV, then you should go to the tab menu "Satellite TV", if for receiving terrestrial or cable TV, then "Terrestrial TV", etc. If you have any questions during the ordering process, you can use the online chat, which is located on each page of the online store, or order a call back.
We hope that in the digital TV online store you will be able to spend the minimum amount of time ordering the required equipment.

- (not official!) - This software is developed on the basis of the official 3.4.369 (the one that will pour from the satellite 07.10.13.) The main difference of this firmware is that advertising banners are not shown when switching channels. Works stably.

Features of this firmware:

2 - the submenu search for tricolor TV channels has been removed from the main menu (but it is still available in the menu >> settings >> automatic search >> search type >> tricolor TV) or during initial installation (reset to factory settings)

3 - when you enter the main menu or the game menu, the picture does not disappear!

4 - the ruffles on the side were removed in the main thing (in my opinion it was not harmonious :))

5 - exit from the channel list is organized by double pressing the ok button (exactly the same as it is organized in 99% of all tuners)

6 - when you press the game button, the swastika flaunted the search for tricolor channels now, as it should be, the swastika of the game :)

7 - the algorithm of the EPG menu has been changed - now it is much more convenient (everything can be done with just one button ok)

8 - in the Tetris menu, the ok and up buttons were swapped

9 - possible, but not guaranteed! the cause of hangups of receivers with modules of the 11th series has been eliminated.

10 - the actual channels on 10/05/2013 have already been collected in the firmware, all garbage has been removed !!!

Past releases

The procedure is quite simple and does not require special skills from subscribers, you just need to follow the instructions for replacing the software from the info channel. The update process takes some time and you need to be patient and wait for the end. But despite all the warnings, some users do not wait for the end of the software update process and as a result the receiver stops working.

Practice shows that in very rare cases, even after waiting for the software update to complete, the receiver may not turn on after a reboot. There is only one diagnosis - a failure to update the software.

But do not despair. This can be fixed by yourself and at home if you have a computer or another similar working receiver at hand. How to do this is described below. Helps in 99% of cases of unsuccessful software updates from the satellite.

Software update from a computer.

1. We purchase / solder ourselves null modem cable

2. Disconnect the receiver and computer from the network.

3. Connect the RS232 input of the receiver to the COM port on the computer.

4. Turn on the computer.

5., unpack and install the program

6. and unpack the required receiver firmware:

7. Run the program (the shortcut should appear on the desktop).

The following window will appear.

8. Click the Open File button and select the downloaded file with the firmware in the window that opens, after unzipping it.

9. Click on the Upload button, turn on the receiver in the network and turn on the Power button on the back of the receiver.

10. The progress bar of the File uploading process will begin to show the % and time until the end of the software upload process.

In this case, the letter L (Load - loading) and% of the process will be displayed on the digital display of the receiver.

11. After that, the progress bar of the Burning process will begin to show% and the time until the end of the burning process (firmware) of the software.

In this case, the letter b (burn - burning) and% of the process will be displayed on the digital display of the receiver.

12. The software update process is completed. Turn off the receiver and computer. Disconnect the null modem cable.

Record ID: 35 does not exist!

Software update from the receiver (for example, DRE 5000).

For DRE 4000, DRE 5001, DRE 7300 the process is similar.

1. We purchase / solder ourselvesnull modem cable.
2. Disconnect the receivers from the network.
3. A working receiver must be connected to the TV. The problem receiver is not connected to the TV.
4. We connect both receivers with a null-modem cable.

The picture above shows a working receiver. Below is the problem receiver.
4-2. Turn on the working receiver.
4-3. We enter the menu, select the item Settings.

5. Enter PIN. The default is 0000 (four zeros).

6. In the Settings menu, select Data transfer.

7. A window will appear:

Press the blue button on the remote control.
8. Two scales appear. And the Data Processing bar will start to fill up.

9. When the Data Processing jackal reaches 100%, an inscription appears:

10. Turn on the non-working receiver - turn it on and turn on the Power behind the receiver.
11. The filling of the lower scale has begun.

On the indicators of the receivers, the progress of the process of transferring / downloading data will be displayed in% (on the display, the symbol L - Load, loading, on the lower receiver, 5 - transfer, on the upper one).

12. After that, the TV will display:

Receivers do not turn off! The process of writing the firmware to the firmware (faulty) receiver begins. In this case, the process indication will NOT occur on the TV screen. The indication process is visible on the scoreboard of the receiver being flashed (on the scoreboard, the symbol b - burn, burn, on the lower receiver).

13. We are waiting for the indicator to reach 100% on the receiver being flashed. After the firmware receiver will reboot and the display will show the following:

14. The firmware process is completed. Remote control to the question “Data transfer completed. Repeat?" choose "NO". Turn off the receivers and disconnect the null modem cable.