How to disable wifi password on laptop. Forgot your WiFi password? Learn how to change the password on a WiFi router. How to view Wi-Fi password in Windows

Have you encountered a situation where there is no Internet due to the fact that the router has become unavailable? There is no way to go to the settings, because the password has been forgotten. What to do? There are two ways: software and hardware. Consider how to reset the password on the router in more detail.

A bit of theory

A router is a microscopic computer equipped with a processor, fixed and random access memory. Management occurs using the OS.
After purchasing the device, to go to the default settings, a username and password are set. These values change. What if you changed them and forgot? Let's consider this question in more detail.

What is it for

Any router can fail. Password reset is used if:

Forgot your password;
incorrect settings;
provider has changed
to change your home network settings.

What to do first

When resetting, all device settings will change. The router will have to be reconfigured.

Hard reset

The device has a small button or hole. It must be clamped with something sharp (for example, a paper clip) for 10 seconds. reset to factory.

How to reset password on Asus router

Open a browser, type http://192.168.1.1 or router.asus.com. Go to the "Administration" section.
Further, as in the screenshot.
The router will reboot. Recovery will take 2-3 minutes.

How to reset password on Tp-Link router

Navigate to 192.168.1.1. Password and login (if you have not changed it) "admin".
Next, do this:
It will happen, the settings will be restored to the factory settings.

How to reset password on D-Link router

Soft reset is no different from the method discussed above. Write in the browser 192.168.0.1. Next, go to "System" - "Configuration" - "Factory settings".

Hard hard reset

There are situations that fragments of code remain in the memory of the router. The device is not working properly. Then pressing the reset button "Reset" will not help. What to do? Follow the sequence of these steps:

Press "Reset" and hold while you perform the following steps;
Power off the router after 30 seconds;
Hold the reset button for 30 seconds.

How to reset the Wi-Fi (Wi-Fi) router password

Connect without a password using the WPS standard. Almost all router models support it. For this:

The data will be transmitted by the router. The other person does not connect in this way.

How to look in OS

Press "Win + X", select "Options".
Further, as in the screenshot.

Conclusion

We looked at how to reset the username and password on the router. The easiest way is to reset the settings to factory settings. Use it if you are sure that you can prescribe the settings yourself. Otherwise, try connecting using WPS, or check the password in the system settings.

Hello! When I write in some instructions that I need to go into the router settings, I try to describe in detail the process itself, how to enter the control panel in order to make some settings there. In most cases, this does not cause any difficulties. But it often happens that we simply forgot the password, and many questions arise, how to get into the settings in this case.

The very question of entering the router settings, if you forgot the password, is not very clear. Because the router has at least two passwords. And it is not clear which of them you forgot, and what is the problem specifically in your case.

The password that is used to connect to your Wi-Fi network.
And the password that you need to specify to enter the router settings. Most often, it is this password that is changed and successfully forgotten. It is clear that until we specify the correct password, we will not get into the router settings. Well, the factory password does not work (which is usually admin) because we changed it.

These problems can be encountered in the process of logging into the control panel of the router. Now we will consider the solution based on your case, we will consider both options.

I immediately give a link to instructions for solving a variety of problems that you may encounter when entering your router settings: There are also links to detailed instructions for certain router manufacturers: TP-LINK, ASUS, D-Link, etc.

If you forgot your Wi-Fi password and can't access your router settings

This is the first option in which we do not remember the password from our Wi-Fi network. And we may not be able to connect to it. And in the settings of the router, we need to go in order to see or change the password.

In this case, everything is very simple:

First, we have very detailed instructions on how to. You can see the password on the computer (if any), just remember it. Connect to the wireless network and go to the control panel.
Secondly, you can access the router settings from the device that is currently connected to your Wi-Fi. And already in the settings of the router, see the forgotten password, or change it.
Thirdly, we connect to the router via a network cable, and go to the control panel. In this case, we do not need a Wi-Fi password at all. If you don’t know how to connect to the router via cable, then here is the detailed one.

I think this problem has been sorted out.

If you forgot the password to enter the router settings

This happens most often. The control panel of each router is password protected. You need to enter a username and password there. This is necessary to protect the settings so that everyone who connects to your network cannot access them.

If the router is new, not yet configured, then the standard password and username are used. In most cases, these are admin and admin. Or no protection at all. We set or change this password already in the process of setting up the router. I always recommend doing this in my instructions. And there is even a separate one.

So, we changed this password, set up the router, and forgot it. And then we urgently needed to go into the settings, and we don’t remember the password. On the authorization page, we specify some name and password, but nothing happens, the page just reloads, or we get a message that the password is incorrect.

That's all, we can't get into the settings. If you can’t remember this data, and perhaps you didn’t change the password, you will have to reset the router settings. After that, we will go to the control panel according to the factory settings, which are indicated on the bottom of the router, on the sticker.

To do a factory reset, you need to hold down the button for about 10 seconds, which is usually signed as: RESET, WPS / RESET, Sros, Default. It all depends on the model of your router. The button can be recessed into the body, and you need to press it with something sharp. The router must be powered on. This button looks like this:

After returning to the factory settings, use the data that is indicated on the router itself to enter the control panel. If the factory data is not indicated there, then there is no password by default.

If you have difficulty resetting the settings, then we have detailed instructions on the site for most manufacturers. If you do not find it, write in the comments, I will give a link.

If something did not work out, just write, we will try to solve your problem.

It would seem that all users, on the contrary, try to put a password on their wireless network, and as difficult as possible. With such statistics, it is not clear why remove the password from your wireless networks and make a Wi-Fi network open. However, there are plenty of reasons.

Here are the possible reasons:

You want to temporarily remove the password and make your network public. It will come in handy when you are expecting a lot of guests and do not want to overshadow the holiday by entering a password
You want to remove the factory password as unnecessary. For example, you live in a private house, and no one will catch your Wi-Fi
You use old laptops, phones, tablets, etc. that do not want to connect to a wireless network with a password
You want to organize free Internet access via Wi-Fi for your visitors (clients, employees)

Before removing the Wi-Fi network password and making it open, let's make it clear that you are aware that your Internet can be used by anyone who falls within the coverage area of your Wi-Fi transmitter (Wi-Fi router, access point). This can both cause an increased load on your Wi-Fi, which will manifest itself as a drop in Internet speed. Also, an open network is a favorable environment for the transmission of viruses between network clients, not to mention unwanted access to your "public files and folders", if any, of course.

The risks listed above can be partially leveled, partially avoided.

How to remove the main risks associated with an open Wi-Fi network?

Use guest network

Some routers contain the ability to create a guest network. This is the ideal option.

The guest network is a wireless local area network separated from your main Wi-Fi network, of course, with the ability for client devices to access the Internet. This leads to the fact that devices of different wireless networks "do not see" each other, which complicates the transfer of viruses between them.

With the guest network settings, you can set the maximum number of connected devices, limit the speed, or set the speed priority for guest network client devices.

Of course, not all Wi-Fi routers and access points fully implement this functionality. However, it’s worth checking, maybe your router is endowed with such capabilities.

If the guest network is not available

Again, not all wireless routers and access points support a guest network. In this case, first of all, you should password-protect the entrance to the router settings so that no one except you can change them. Secondly, make sure that sharing of your files on your computer is disabled. I think it will be unpleasant for you if someone gets access to files and folders without your consent.

When using old computers that do not work correctly with password-protected wireless networks and do not want to share the Internet, the router can only be allowed to connect to devices whose MAC address is registered in the router. This is done in the router settings, but is not part of the topic of the article.

How to enter the settings of a Wi-Fi router

Connect your computer to the router via LAN. If the setting is carried out using a wireless network, please refer to " ". Turn on the power. Wait for the router to fully boot (this may take several minutes). Open your Internet browser and enter the address 192.168.0.1 or 192.168.1.1 or 192.168.2.1 in the address bar, the address is written on the back of the router. Perhaps the article "" will be useful to you. A window will “pop up” in the browser and ask you to enter your login (username) and password, you will find them all on the same reverse side of the router. By default, most Wi-Fi routers use login: admin, password: admin, or login: admin, password: "leave blank".

Consider how to remove the password of a Wi-Fi network and make it open using the example of Wi-Fi routers:

How to remove the Wi-Fi network password on an ASUS router, making it open

After opening the ASUS router settings page, click "Wireless" on the left. On the refreshed page, find the "Authentication method" drop-down list, and select "Open System" from the list.

Click the "Apply" button at the bottom of the page.
It is also advisable to change the network name (SSID), otherwise the computer will try to associate the Wi-Fi name with the former password, and this may cause problems. For ASUS, it's as easy as shelling pears, take a look at the pictures. If you really need to remove the password and leave the network name the same, then the link to how to do this is higher in the article.
It's that simple.

How to remove the Wi-Fi network password on a TP-LINK router and make it open

We discussed above how to open the router settings web page. On the left, select "Wireless" (Wireless), in the list that opens, select "Security" (Wireless Security). On the updated page, check the box next to "Disable security" (Disable Security).

To save the changes, click the "Save" button. It is also desirable to change the network name (SSID). Above in the article are links to instructions on how to do this, and to instructions on what to do if you need to leave the name of the network the same.

Remove Wi-Fi network password by opening it on a Netgear router

What do we need to do to open a network in Netgear? In principle, nothing complicated.
Click on the left "Wireless Settings" (Wireless network settings), and on the updated page
under "Security Options" select "Disable".

Click the "Apply" button to apply the settings.
It is advisable to change the network name (SSID). For Netgear, this is very easy. Just take a look at the picture above and you will understand everything. If it is critical to leave the SSID (network name) unchanged, see the link to the instructions above in the article.

How to remove the wireless network password on a D-Link Wi-Fi router and make it open

The web interfaces of D-link routers can differ not only visually, but also have a different arrangement of settings items. Therefore, we will consider several options separately. The names are chosen intuitively, do not get attached to them.
Also, after removing the password, it is advisable to change the network name (SSID). It is very easy for D-Link to do this. Link to instructions above article.

Orange D-Link web interface

On the left, select "Wireless Settings", "Manual Settings", on the refreshed page, find "Security Mode", and select "None" from the drop-down list.

D-Link gray web interface

At the bottom of this settings page, you will find the "Advanced Settings" link, click it. On the updated page on the right you will find the Wi-Fi section, where you should click "Security settings" (Security settings). Security settings should be selected in the drop-down list "Open" (Open).

Then apply the "Apply" settings.

White web-interface (air-interface) D-Link

On the left, you click on the Wi-Fi section, where you should select "Security settings" (Security settings). Security settings should be selected in the drop-down list "Open" (Open).

Then apply the "Apply" settings.

Make open a wireless network on a Zyxel Wi-Fi router

Zyxel web interfaces may also differ visually. We will give the considered web interfaces names, although we do not know their official names.
Even after canceling the password, it is advisable to change the network name (SSID). It's very easy for Zyxel to do this. Link to instructions above article.

Classic Zyxel Interface

In the page that opens, click "Wi-Fi network" (Wireless), in the list that opens, click "Security" (Security). On the updated page, find the inscription "Authentication" and select "Don't use" in the drop-down list.

Then you should apply the settings "Apply" (Apply).

Modern Zyxel interface

In the page that opens, click the Wi-Fi icon, in the window that opens, uncheck the box next to "Use connection security". Save your settings.

Then you should apply the settings "Apply" (Apply).

How to remove the wireless password on a Linksys Wi-Fi router

For Linksys routers, removing the wireless network password is especially easy. At the top of the settings page, select "Wireless" (Wireless), in the list that opens, select "Security" (Wireless Security). On the refreshed page, select "Disabled" from the drop-down list.

To save the changes, click the "Save Settings" button. It is advisable to change the network name (SSID), otherwise you will need to delete the wireless network settings (link to the instructions as posted above in the text).

How to remove the Wi-Fi password on a Netis Wi-Fi router

Netis is a respected company that has flooded the CIS countries with inexpensive, but quite decent routers. Removing the password from the wireless network is no more difficult here than in the routers of the firms discussed above.
On the left, select "Wireless" (Wireless), in the list that opens, select "Wi-Fi Settings" (Wireless Settings). On the updated page, next to the inscription "Authentication Type" (Authentication Type) in the drop-down list, select "No" (None).

That's all. If you were interested in the article, write about it in the comments or share it on social networks. Good luck and good mood.

The access key to the network or to the network administrator's page is lost, do not lose heart. There is a possibility to restore them. This article will help you solve this problem.

Standard passwords for routers

Each wi-fi router operates on the basis of access data to the Internet and local network, which are login and password. They are created at the very beginning of use at the first stages of setting up network equipment. The login is always the same word in Latin “admin”, and the password can be either the word “admin” or the numbers 1234, 123, 0000.

Also, there may be no password at all. And for the Kyivstar operator, such a login is possible.

In any case, in order not to try your luck and not waste time on random selection, you need to look at the data sheet of the router, which is included and may look like a brochure. If the router came to the user as a used product and the data sheet is not available, you should ask your friends, acquaintances or relatives who use a network device manufactured by the same manufacturer, because. login and password will be the same.

Factory settings

At the initial stage of setup, after the introduction of standard identification data, the user will be offered the opportunity to change the login and password to make it difficult for unauthorized users to enter the domain. Those. on the computer screen, the interface will display all the necessary data, as well as prompts for the formation of an "access key", which includes a login and password.

After passing this stage, the user will be prompted to create a local network with automatic connection to the Internet for the convenience of work in the future. At the same time, do not confuse the login and password for accessing the local network, which operates on the basis of the router, and the Internet, because. they are two different things.

I forgot my router password, what should I do?

What to do if you forgot your router password is a common question for many users who have forgotten or lost their data. How to be in this situation? Restoring the key is easy. It all depends on which network password and login was lost. If the matter is in the local network, i.e. in your router, there is no 2.serious difficulty to restore it.

Video: resetting the interface password of TP-Link routers

If the user has forgotten the password of the Wi-Fi router, he needs to proceed as follows:

How to recover the password and login for the router, if they are necessary to access the Internet?

In case of loss of data, the following procedure is required to use the resources of the World Wide Web:

Thus, the user has the opportunity to independently correct the situation without outside help.

Admin Domain Recovery

In addition to those users who have lost data on access to the local network and the Internet, there are those who manage to lose access to the administrator page (the home page of the router). In this case, there is no chance to recover the lost information and change the settings of the network device. The forums often feature a question like: “I forgot my login and password from the admin panel. What do i do?". It is easier to reset the settings in the network device and re-create a new local network.

To reset the router parameters, just press and hold the button on the rear panel in this position for several seconds.

In this case, the lights on the front of the device will go out for a while, and then work again. The button itself is located in a small hole to prevent accidental reset, and you can only press it with the help of an additional device, which can be a match, needle, pin, etc.

Recovery Methods

The router settings will be of no use if the user loses the access keys to the admin page, router, local network and the Internet. In this case, each of the access keys will be restored differently. The main methods are hardware and software.

The hardware access recovery method is associated with checking the parameters on the router's home page, and the software one relies on the use of the software registry and special working applications that scan all information on the computer about network use.

For hardware recovery to the network, at least a login and password for the administrative page are required, on which all the parameters and settings of the local network and Internet connection are formed. To enter the administrator's page, you need to type the manufacturer's IP address in the address bar of your Internet browser.

The IP address can be found on a sticker on the bottom of the router.

If there is none, then the home addresses of the routers look like this:

D-link 192.168.0.1
Zyxel 192.168.1.1
Asus 192.168.1.1
Netgear 192.168.1.1
TPlink 192.168.1.1

After logging in to the corresponding address of the router, the user will be presented with an interface with many settings and network parameters. In order to find out the data on the local network, you need to enter the "local network" tab. Also, this tab can be called a wi-fi network or have names similar in meaning.

After that, the user must find the "wpa key" parameter. Opposite it, the access password to the router will be located.

Password, access to the router - that's not all. In addition to the local network login key, you may also need login data for the provider's domain. This data is also specified in the settings of the network device.

To do this, after fixing the data on access to the local network, you need to go to the "Internet" tab, where not only the parameters and connection technology will be indicated, but also data on entering the Internet.

Most often, the login and password are located next to the line "account settings" or "connection settings".

Recovery utility (program)

In addition to a hardware method for eliminating the problem of losing identification data when logging into the Internet and a local network, there is also a software one. It is used by professional users and is not suitable for beginners. Thus, the participation of a second user with a higher level of knowledge in this area will be required.

The programmatic method uses the following working applications to help recover the necessary data by logins and access passwords:

Dialupass;
Remote Desktop PassView;
RouterPassView;
WirelessKey View;
Wireless Password Recovery.

And this is not the whole list. By themselves, these programs are amateur developments, and not the result of the work of professional teams, so the interface of these programs is not always convenient and understandable for a beginner. But if the user nevertheless decided on independent actions, then he needs to be prepared for the fact that most links to such working applications may contain malicious software.

Throughout the work of the profile program for searching and detecting the login and password from the network, an antivirus with the maximum possible set of functions should work on the computer in order to prevent infection of your personal computer and damage or theft of personal data.

The work of such programs is based on the basic principles of the functioning of the operating system, which, in turn, captures every step of the user in the electronic information space. At the same time, a register is formed that describes all the actions committed recently. They will be stored as encrypted files until all the hard disk space is full.

It is impossible to open these files without special knowledge and professional skills. Not a single program known to many users will be able to read them and display the necessary information on the computer screen. In this case, special applications are needed to help reveal encrypted logins and passwords.

After appropriate use of the program, the owner of the PC will be able to independently use both the local and the Internet network in the future. But at the same time, we must not forget that all access keys to networks must be saved without fail both in the form of a regular file with printed text and in writing, so as not to experience significant difficulties in connecting in the future.

Video: installing and configuring a Wi-Fi router

To prevent data loss for access to the local network and the Internet, novice users are advised to take the following steps:

during configuration and installation of drivers for network equipment, the program will offer to save a file with backup data for access on the PC desktop;
after creating with network access data, the file must be copied to removable media and another copy made in any other folder;
after copying the files, you must manually write down on paper all the necessary logins and passwords from the network.

In addition, do not forget that the keys are also freely available for viewing from the computer of the user who configured the router. This data can be seen in the properties of the network. To do this, you need to find the network connection icon on the taskbar on the desktop in the lower right corner.

Then point the cursor at the name of the home network and press the right button. When a new window appears, select the "properties" option and in the next new window you can already see all the necessary keys.

Using these tips will reduce the likelihood of a complete loss of the necessary information for the local Internet.

Question answer:

How to view Wi-Fi password in Windows?

To view the password to access the wireless LAN in Windows, you must:

Is it possible to recover the network security key?

The security key for accessing the local network is easy to recover. It is enough to go to the administrator page and in the settings find the line "security key", where the access password will be indicated.

How to find out the username and password if lost?

In order to find out the login and password for accessing the Internet, the administrator page or the local network, you should use specialized programs (Dialupass, Remote Desktop PassView, RouterPassView), which can find the necessary data in encrypted files of the network usage history.

Similar information can also be found on the home page of the router, if the access keys to it are not lost.

What to do if you forgot the password from the wifi (wi-fi) router?

If the user has forgotten the password from the wi-fi router, it is necessary to use specialized programs for reading encrypted information (Dialupass, Remote Desktop PassView, Router Pass View). But if the programs do not help, you will need to reset the device settings to factory settings by pressing a button located on the back of the router. Next, you should reconfigure the network equipment and the network itself.

Your home Wi-Fi network must be password protected. But there are different cases, you say. For example, you want to invite friends and have a party. In this case, you should consider that they (your friends) will most likely want to connect to the Internet. And this, accordingly, should not be accompanied by any difficulties. And in order not to mess around with passwords, it's better to just turn off the Wi-Fi access password for a while. Then it can be reinstalled.

Or, perhaps, you are having some problems connecting this or that device. And in order not to bother too much, not to look for a solution to problems related to the password and type of security, you can temporarily remove the password. Often, such problems occur, for example, when connecting a TV (Smart TV) to a wireless network.

How to remove password from Wi-Fi

So, first of all, you, of course, need to open the router settings. Next, go to the tab with the wireless network security settings.

In the case of Asus routers, removing the password is quite easy - you just need to go to the " Wireless network" and in the authentication method column, set " open system».

For the new Asus web interface:

Then you need to save the settings and reboot the router.

If you have worth TP link router, go to the tab Wireles-Wireless Security and press " Disable Security". Confirm by changing the settings and reboot the router.

For Russian TP-Link web interface:

Confirm by changing the settings and reboot the router.

For D-Link routers, you need to open the tab " SETUP» then select « WIRELESS SETTINGS"and click at the very bottom on the Manual Wireless Connection Setup button, after that a page with wireless network settings will open, at the very bottom we see the item Security Mode select None from the list. (For older firmware versions)