Command for windows 7 autostart programs. Automatic start of programs in Windows. Removing Startup Programs in Windows XP

- This is the automatic launch of programs when you turn on the computer. Most often, this function is turned on independently when installing the program into the operating system. In some cases, autoload can be a very useful feature. You can configure it yourself and leave only the necessary programs in startup. It is worth considering that with a large number of active programs in autorun, the computer's RAM is consumed in a larger amount, as a result of which the system startup can slow down significantly.

Why are programs added to startup?

We have already said above that the installed utilities can independently add themselves to the startup registry. If necessary, the user can independently put any desired program into autorun so that when the computer is turned on, the system automatically launches a frequently used utility.

Why clean the startup registry?

First of all, this manipulation should be done if the computer system began to “slow down” and boot very slowly. Thus, you can free up a significant amount of RAM, the presence of which is an essential criterion for the quality of your computer.

Autoload may also contain super-important programs that contribute to the correct operation of the operating system. Therefore, when cleaning the registry, you should be extremely careful.

Shutdown in Windows 7

Read also: How to speed up Windows 10? TOP 6 Main ways to overclock the operating system

There are several answers to the question of how to disable startup programs in windows 7. Each of them implies a separate method of removal.

Method number 1. Uninstall via the start menu

Users who have been using this version of the operating system for quite a long time must have wondered "What is "hiding" in the Startup folder in the Start menu?".

More advanced users have long guessed that this folder can be used to disable autorun programs. To do this, open the Start menu, go to All Programs, then find the Startup folder and open it.

If there are no third-party programs in startup, when you open the folder, it will say "(empty)".

If third-party programs are present at startup, you can remove any of them yourself. To do this, right-click on the required program and select the “Delete” item, after which the item will go to the trash, from which it can be permanently deleted using the Shift + Delete key combination.

This method is the easiest, but in this case it is impossible to see all the programs that are in autorun. Some of them are hiding.

If clearing this folder did not resolve unwanted automatic program loading when you start your computer, we recommend that you try one of the methods listed below.

Method number 2. Using MSConfig

Read also: [Instruction] "Service Host: Local System" loads Windows 10 disk

This program is present by default in any version of the Windows operating system. There are 2 ways to call it.

In the first case, open the Start menu and enter "msconfig" (without quotes) in the search bar. After the system detects it, double-click LMB to launch it.

In an alternative launch version, you need to launch the command line by pressing the Win + R hot key combination. In the window that appears, enter the command "msconfig" (without quotes) and click the "OK" button.

After starting the utility, a window will open in which you can remove programs from the startup registry.

To do this, go to the "Startup" tab, and then uncheck the boxes for those applications that you want to disable. After disabling unnecessary programs, click the "Apply" and "OK" buttons.

If you do not know what this or that application is responsible for, it is not recommended to disable it yourself, as you can disrupt the correct operation of the operating system.

After that, you will be prompted to restart the computer, automatically sent by the system. It is not necessary to restart the computer, so in this case the choice is yours.

When using this method, installation of additional programs is not required, since MSConfig is a standard pre-installed utility for all versions of the Windows operating system.

However, this method will not allow you to remove absolutely all programs and applications from autorun, so we recommend that you consider the methods below.

Method number 3. Removing manually from the registry

Read also: [Instruction] How to reinstall Windows (7/8/10) on a computer or laptop | 2019

The registry can also be launched in two ways - through the search menu "Start" or the command line.

In this case, you need to enter the command "regedit" (without quotes). After starting, the main registry window will open in front of you.

In the left part of the window there are two autorun folders - local and personal. The first address is:

Computer\HKEY_ LOCAL_ MACHINE\ Software\ Microsoft\ Windows\ CurrentVersion\ Run

And for the second:

Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run

To clean the registry from unnecessary applications, we need to get into the final folder (“Run”), navigating through the “tree” of folders as indicated in the address.

To remove applications from autorun, right-click on its name, and then select the "Delete" item in the context menu.

Cleaning is required in both sections.

In this case, we will use the program, which is freely available to all users on the official website. The utility is easy to use, takes up little space on your hard drive, but at the same time, it is the best solution for autorun cleaning. Download

On the developer's website, the program is provided only in English. We will tell you how to use it correctly without knowing foreign languages.

The program is downloaded in a ZIP format archive, which can be unzipped using any archiver (7zip, WinRar, etc.).

After you unzip the downloaded file, four shortcuts will be presented in the window in front of you. To install the program, we need the autoruns.exe file, which needs to be run as an administrator.

When you first launch the application, you will be required to accept the license agreement by clicking the "Agree" button.

After that, the window of the program itself will start. This means that the utility does not require installation on the computer system.

By default, the application window will open in the "Everything" tab at startup. It presents all, without exception, programs and applications included in autorun.

For the convenience of users, there are also tabs in which applications are divided into categories (Winlog, Driver, Explorer, etc.).

To remove autorun, you need to uncheck the box next to the unnecessary application. If you select a line with a single click of the LMB, then from the bottom of the window you can see information about the program that is in autoload (version, size, location path, etc.).

When you go to the “Logon” tab, you will see a list of programs that were previously disabled in other ways.

The links provided lead to trusted sources and do not carry malicious files or viruses. In no case do we recommend downloading programs from dubious resources, as you can cause irreparable harm to your computer system.

"OK" .

The window that opens will display the autoload data for the current user.

To view the data of the startup registry for all users, the command "shell: common startup" (without quotes) is entered into the command line.

The window that opens will display the startup applications for all users who have an account on this computer.

To disable autoload, delete folders of unnecessary applications.

Extra programs interfere with the user every time the computer is started. You have to wait and waste time, and sometimes they are simply not needed at all. I will provide instructions on how to disable them. This will significantly reduce the boot time of your computer.

Attention! Some programs may go back to autoload when you turn them on ( e.g. utorrent).

To avoid this, you need to check their settings and remove autoload.

You can see all the methods not only in the article, but also in the video. Everything is clearly shown there. However, the article has some nuances.

Disable via start menu

There is a special folder that contains files that run every time the computer is turned on. Usually programs are added there themselves during installation if it is configured in them. They may not be here, but it's still worth checking.

Go to Start >> All Programs >> Startup. And delete the extra ones by right-clicking and delete.

In this example, only skype is launched from this folder. Only the main programs located in this folder are displayed here. To turn off the rest ( usually they are in the registry) is better to use other methods.

Disabling autoload in system configurations

All popular versions of Windows have a built-in utility for managing the system. With it, you can simply disable autoload by unchecking the checkboxes. This is usually enough to solve the problem.

You need to open a command prompt. Go to Start >> Run ( Win+R) and enter msconfig as in the image below.

Select the "Startup" tab and uncheck unnecessary programs. I automatically download the program and antivirus.

After that, you will be prompted to restart your computer. This can be done later. There is absolutely no way to remove everything. Only the most basic ones. If this is not enough for you, then see the following methods.

Disable in CCleaner

Unlike the methods above, here you can disable autoload for applications. First, download the free Ccleaner program, install and run. Select the "Service" category and the startup tab. Turn off or remove unnecessary programs as shown in the image below. I left only the antivirus.

Disabling makes the task for autoload inactive, and deleting it completely removes it. However, programs can still add the task themselves even after using delete.

Disabling in the registry

Everything here is done by hand. If you do not want to do it by hand, then go to the next method. There it is much easier.

In the progress line write regedit and go through the directory:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run

Then a list of tasks for autoloading will appear. Each line will refer to a separate program. Delete the extra ones as in the image below.

Take a closer look at the path:

HKEY_LOCAL_MACHINE - branch for all users.
HKEY_CURRENT_USER - The branch for the user you are currently logged into.

If this is not enough, then the following method should help.

Shutdown with the autorun utility

The utility allows you to conveniently work with the registry and disable autoload in just 1 click. Its capabilities include disabling not only programs, but also various dll libraries, system services, device drivers, and in general everything that loads automatically. Download it and. Installation is not required.

Run the autoruns or autoruns64 file depending on your system version and accept the license agreement. Other files run it on the execution line.

Now you will see its interface. Here, select the "Everything" tab and simply uncheck the unnecessary programs. All possible startup objects will be shown here.

Remove only what you know! Disabling important system libraries or services can make your computer unstable.

After that, just close the utility. There is no need to save anything. She will correct the values in the registry immediately after adding or removing a checkmark. You don't have to do anything manually.

It also highlights rows with different colors:

Yellow - available in startup tasks, but no files found. They cannot start automatically.
Red - files without a description and without an author. It could be viruses but not always so).

Information about the file is displayed below. Weight, location and more. Separate tabs indicate the location of objects. You can tinker and turn off a lot of superfluous and unnecessary ( everyone individually). The main thing is to read about what you turn off.

How many startup programs do you have?

As new programs are installed, your computer may slow down. One of the reasons is a large number of autorun utilities that take up device resources. Today we will look at what autoload is, as well as how to optimize it so that resources are not wasted.

Autoload: what is this option and why is it useful

The option to autorun programs means opening utilities for further work in them immediately after turning on the computer, in particular, Windows OS. There is a list of startup programs. The user has the right to edit it himself: add and remove unnecessary utilities. The automatic mode of enabling applications will save you from searching for shortcuts on the "Desktop" in order to launch programs: you have turned on your computer device and can immediately work in the desired utility.

In the "Startup" tab, you can edit the list with programs that should open when Windows starts

It is important to know that a considerable number of startup utilities negatively affect the performance of the operating system: the utilities included in the list continue to function in the background after autorun and load the central processor. As a result, the device works slowly, especially if it has poor technical characteristics.

Thus, it is not recommended to include many utilities in the list: no more than 7. In this case, only antivirus will be a mandatory item. All other programs are up to you. For example, if you work constantly on the Internet, put your favorite browser on startup.

How to disable autorun utilities in Windows 10 or remove unnecessary software from there

Autoload is a useful option, but sometimes, as we noted above, users also face its disadvantages. Problems in this case may appear through no fault of a person: often, during installation, utilities are included automatically in the autorun list without the knowledge of the user, even if there is no need for this. As a result, even a new computer starts to freeze.

How to be in such a situation? You can't turn off autoload completely. In this case, only unnecessary programs are removed in any way below, so that the list becomes much smaller.

Through the "Task Manager"

In the "Task Manager" you can not only end program processes, but also set up your autorun list. What exactly needs to be done in this window?

In Windows 10, "Task Manager" can be quickly launched through the "Taskbar" (the bottom bar on the computer screen, which contains icons of open programs and the "Start" button). Right-click on the icon-free field on the "Taskbar" and select "Task Manager" from the context menu.
Select "Task Manager" from the context menu of the "Taskbar"
You can open this window in the classic way: hold down the key combination Ctrl + Shift + Delete and select "Task Manager" in the new screen.
The dispatcher window will have several tabs. As you may have guessed, we need the "Startup" section.
In Task Manager, switch to the Startup tab
Click on the column at the top "Status" to sort the list with utilities - it will be convenient to work with it.
Click on the "State" parameter to sort the list
Look at the applications that are included in startup. Find the ones you don't need. Select them one by one with the left mouse button, and then click on the "Disable" button located at the bottom of the window. If you want to deactivate all applications in this list, repeat the procedure for all items except for the antivirus, as it should start working immediately after Windows starts.
Select the program in the list with the left mouse button and click on the "Disable" button
Close Task Manager and restart your device.

Video: how to remove programs from the autorun list using the "Task Manager"

Using the "Registry Editor"

You can set up a list with autorun utilities not only through the familiar Task Manager, but also through a window called the Registry Editor. Even beginners who previously did not know about the existence of this important built-in service will cope with this procedure. Let's consider everything step by step.

In order for the Registry Editor window to appear on the screen of your device, hold down two keys at the same time: Win (the button with the Windows icon) and R.
A small Run window will open. It will contain one line "Open". Enter the regedit command here. Now click on OK or press Enter on the keyboard.
Enter the regedit command in the "Open" field
We click on the left button "Yes" to allow the "Registry Editor" to make changes on this computer.
Click "Yes" to allow "Registry Editor" to make changes to your device
The editor window is divided into two parts. We will look for the folder with files we need in the left area, where the tree structure is located.
The "Registry Editor" window is divided into two parts: sections and a list of files with folders
First, open the following sections one by one: HKEY_CURRENT_USER - Software - Microsoft - Windows - CurrentVersion - Run.
As a result, you will see a list of files that are responsible for auto-launching individual applications on the device. As a rule, the name of these files contains the name of the utility, so it will be easy to determine which items to remove here.
Search the list of registry entries in the Run folder for the names of unnecessary programs that should not start with Windows
To remove an application from the list, such as ViStart or CCleaner, right-click on it to bring up a small menu with options. In it, we already select "Delete".
Click on "Delete" to remove the registry entry
Click on "Yes" to confirm the removal of the file from the registry. Don't worry, it won't crash your system. You simply disable the launch of the utility.
Confirm the deletion of the registry entry by clicking "Yes"

Using the "Startup" folder on the system drive

The folder containing the list of startup programs is located on the system drive. In order not to look for it in Windows Explorer for a long time, we suggest using a quick method that will help you immediately display the desired section on the screen. So what needs to be done:

On your keyboard, hold down and hold two keys for a couple of seconds: Win and R. The familiar Run window will open, with which we launched the Registry Editor.
In the "Open" field, write the following: shell: startup. In order not to make a mistake in the command, it is better to copy it, and then paste it into the line using the context menu, which is called by the right mouse button.
Type shell:startup in the "Open" field to launch the "Startup" folder
As a result, "Windows Explorer" will start, in particular, the "Startup" folder.
In the "Startup" folder there will be a list of programs that start working together with the launch of Windows
To remove an unwanted application from the list, right-click on it to bring up a list of options. In it, we already click on the “Delete” item, which is closer to the end.
Select Remove from the context menu that appears to remove the program shortcut from the Startup folder

This method has a big minus: not all applications that are in the "Autorun" mode are displayed in this folder. Thus, you will not be able to fully edit the list of utilities.

Uninstalling with Task Scheduler

You can optimize the list of utilities for autorun along with Windows boot using another built-in service of the operating system: "Task Scheduler". How to open it and what needs to be done in its window?

Open the "Search" section on the "Taskbar". It will be with a magnifying glass icon to the right of the start button.
Click on the magnifying glass icon to open Windows Search
If there is no such icon, enable it: right-click on the "Taskbar" and select "Search" in the context menu, and then the "Show search icon" value.
Select "Show search icon"
In the line enter the query "Task Scheduler". It will appear in the results immediately. Open it with the left mouse button. Enter the search query "Task Scheduler" in the line
In the service window, open the "Task Scheduler Library".
There will be a list in the middle of the window. Find an unnecessary program in it. Left-click on it to highlight it, and then click on Uninstall or Disable on the right third of the screen. Be careful, as here you can disable the launch of important processes.
In the list of programs to be scheduled to run with Windows, disable unnecessary items

Installing special programs

You can clean up the startup list not only using the built-in Windows tools, but also using special software. Today we will consider for example two simple and effective utilities: CCleaner and Autorun Organizer.

CCleaner: quickly and easily remove programs from autorun

The CCleaner utility is a universal assistant for optimizing Windows performance from the Piriform developer. Its main function is to clean hard drives from "junk" files that accumulate over time and begin to slow down the device. With this tool, you can easily and easily edit the list of startup programs. Use the following instructions to remove unnecessary utilities from the list:

Download the utility from the official site. Install the program following the simple prompts of the installation wizard.
Click the Download Free Version button to download the CCleaner installer
Launch the application using the shortcut on the "Desktop".
Go to the "Tools" section, and then to the "Startup" tab. In the Windows block, a list will appear with programs that open when the device is started.
In the "Startup" tab there is a list of programs that start with Windows
Highlight the unnecessary utility in the list with the left mouse button. Then click on the blue "Turn off" or "Delete" button. Repeat this step for each app you want to remove.
Left-click on an unwanted program and select "Turn off" or "Uninstall" on the right side of the screen

Video: how to disable startup programs using CCleaner

Autorun Organizer: easy to use autorun manager

Unlike CCleaner, this tool, developed by ChemTable Software, is only for managing the startup list. This is its main function: it does not clean disks. Nevertheless, the utility copes with its tasks qualitatively: even if the program re-includes itself in the autorun list, Autorun will immediately disable it.

The disadvantage of the utility is that during installation it is proposed to install additional software: Yandex.Browser and other related products from this company. However, you can refuse to install these programs by simply unchecking the boxes.

Now let's look at where you can download this startup manager, as well as how to work in its window.

In the program itself

Often the utilities include themselves again in the autorun list some time after you have removed them using any of the above methods (with the exception of Autorun Organizer, since the program strictly monitors this). To prevent them from re-entering the list, turn off the autoload option in the utility itself along with the OS. Usually in each program there is an item "Start automatically with Windows".

Consider the procedure using the example of one of the popular download managers and a media player in one tool called MediaGet.

Open MediaGet using the shortcut on your desktop or start menu.
Look for a small gear icon in the top right corner.
Find the gear icon in the top right corner
Click on it to open the menu. Now click on "Settings" to open the section with options.
Left click on "Settings"
You will immediately be taken to the "Basic" tab.
In this tab, in the "System" block, find the item "Start with Windows".
Find "Start with Windows"
Uncheck it so that in the future the program does not run in the background immediately after Windows starts.
Uncheck "Start with Windows"
Left-click on the green OK button for the changes to take effect.

You can go into the settings of each program individually and turn off the option to start with Windows to remove them from the list completely.

If there are a lot of unnecessary utilities on startup along with Windows, you need to clean up the list: remove all programs that you do not use, as they take up precious computer system resources. This can be done both using standard Windows tools and special utilities, such as CCleaner and Autorun Organizer. If you notice that the program is re-added to the list, disable the "Start with Windows" option directly in its settings.

Autorun programs is an absolutely essential feature for the normal operation of the computer. With the help of autorun, the operating system independently launches those programs that should run constantly while the computer is running. But, some software developers abuse this feature. As a result, many programs that the user does not need at all all the time are loaded automatically and create a constant load on the computer without doing any useful work. In this article, you will learn how to disable autorun programs in Windows 7.

There are several ways to disable autorun programs in Windows 7. First, you can open the program settings and disable the autorun feature. But, unfortunately, not all programs have such functions in the settings. In addition, if you want to disable autorun of several programs at once, then this method will not be very convenient and will take a lot of time. In such cases, you can use the MSCONFIG utility or special programs to disable autorun programs.

Method number 1. Disable autorun of the program using its settings.

Open the desired program and go to its settings. Here you need to find the autoplay feature and disable it. Let's demonstrate this using the uTorrent program as an example.

Launch the program and open the "Settings" menu. In this menu, select the item "Program settings".

After that, a window with program settings will open in front of you. Find the autorun feature of this program and disable it. In the case of uTorrent, this feature is on the General tab.

After setting up the program, close the window by clicking on the “Ok” button in order to save the changes. That's it, in such a simple way, we disabled the autorun of the uTorrent program in Windows 7.

Method number 2. Disable autorun using the MSCONFIG utility.

This displays a list of programs that start automatically immediately after the start of the Windows 7 operating system. In order to disable their autorun, just uncheck the box next to the name of the program and save the settings by clicking on the "Apply" button.

It should be noted that some programs may not be displayed in the "Startup" tab. This happens if they are run as services. In order to disable autorun of such programs, go to the "Services" tab and check the box next to the "Do not display Microsoft services" function.

After that, you will see all the programs that start automatically as services on your computer. Disabling autorun of such programs is also very simple. To do this, just uncheck the box next to the service name and save the settings.

Method number 3. Disable autoload programs using special programs.

You can also use third party software. So one of the most advanced and convenient programs for managing automatic launch is. Once launched, this program scans the operating system and collects data on all programs that start automatically. These programs are divided into groups and displayed in separate tabs of the Autoruns program.

In order to use Autoruns, it is enough to uncheck the box next to the desired program. Most of the automatically loaded programs are available to the user on the "Logon" tab. In order to disable autostart of services, go to the "Services" tab.

Many owners of computer equipment have repeatedly wondered why, upon purchase, it loaded quickly enough, and after a short period, Windows loading became longer. Experienced PC owners know that when installing new software products, which are in urgent need, the execution files are simultaneously included in the startup registry. As a result, these applications start automatically running in the background along with Windows. Of course, due to this, an additional one increases, in connection with this, its loading time also increases.

Considering that most often the user does not need all these installed applications on a daily basis, a well-founded question arises how to remove the program from startup.

A large list of startup programs can affect the performance of the operating system.

Before proceeding with the study of information on how to disable startup programs in Windows, it is important to understand why this is all done.

Why remove programs from startup

If only a small part of the installed applications starts simultaneously with the operating system, this is unlikely to annoy the PC owner, in some cases their autoload will remain completely invisible to him.

If the number of such programs increases, then the Windows boot time increases proportionally with them. And this already causes negativity on the part of the PC owner. Unfortunately, many developers of a software product, even without urgent need, include the autoload function in it. As a result, after installation, it starts to start along with the OS.

Now it’s quite easy to figure out how to disable startup programs. Opposite unnecessary applications, the green check mark is removed. Upon completion of all actions, the system will prompt you to reboot. It is best to do this immediately, then the result of all actions will be immediately obvious. But you can opt out of the immediate reboot, then the changes will take effect after the scheduled reboot of the system.

Removal using programs

It is also useful to know an alternative wayhow to remove a program from startup. It is carried out thanks to special software products that can be downloaded from various resources, installed and immediately begin to implement the plan.

One such software product that makes it easy to disable everything unnecessary from automatic loading is CCleaner. It is good because it is accompanied by compactness, ease of use and high efficiency.

After launching CCleaner, the user must go to the "Startup" tab, which will also present a complete list of software products that are loaded with the operating system.

The user, wanting to delete a specific application, must click on it, the line will turn blue. Now it remains to sequentially press two buttons: "Turn off" and "OK". Having done such simple manipulations, the user will undoubtedly be able to disable unnecessary applications.

There is another successful program, Autoruns, which acts as an effective assistant if it becomes necessary to remove something from automatic loading. Despite the fact that Autoruns is not Russified, the interface is quite clear, so it does not raise questions even for beginners. To remove a software product from automatic download, you just need to uncheck the box next to it.

Qualified specialists, as well as those who have sufficient practical skills, prevent the installation of programs with an activated automatic launch function, turning it off either at the installation stage or immediately after installation by going into the settings of the installed software application.

Removing unnecessary applications from automatic loading is a necessary measure, since with a significant number of them it is impossible to talk about the successful operation of the operating system.