Yandex navigator app records audio. Yandex Navigator does not work. Causes. How to solve the problem? There is a route, but the Navigator does not track movement along it

For some Huawei smartphone users, every time they try to open the camera, the error message “ Camera app records audio... Currently com.google.android.googlequicksearchbox: interactor cannot be used for audio recording. " If you click OK, the error message will disappear, but will reappear after a few seconds. You can use a camera in this case, but the intrusive message, of course, is very annoying. In addition, it interferes with seeing what you are going to photograph.

Google says Quicksearchbox refers to the search box, or Google now... Nevertheless, if there is no search window widget on the smartphone screen, and the owner of the device has never used the virtual assistant Google Now, it is difficult for him to understand how QuickSearchBox.apk interferes with the operation of the smartphone. And it is even more impossible to trace the connection of this system application with the camera.

This error is quite rare, but we still managed to find on the English-language forums several solutions proposed by users. If you systematically see the message "The Camera application is recording audio. At the moment com.google.android.googlequicksearchbox: interactor cannot be used to record audio" on the screen of your smartphone when you try to start the camera, try using them to fix the error. In any case, this is better than resetting the device to factory settings.

Method 1: Clearing the cache.

Quite often smartphones are used with an overflowing cache. Cleaning it from temporary system files can solve many problems.

In particular, this operation is performed in Wipe Cache Partition(clearing the cache partition where unnecessary temporary files are stored). You can get into the section by holding the key combination "Power on / off button + Volume up button" on the switched off device for 15 seconds. When the menu opens, scroll down to the "Wipe Cache Partition" entry using the volume down button. Select the found position by pressing the power button - this will start clearing the cache. It takes 1-2 seconds. The menu will reappear, in which you should confirm the offer "Reboot the system now" by pressing the power on / off button. Ready.

If the problem persists, check to see if it persists after booting your smartphone into. If so, it is likely that one of the applications you have recently installed is interfering with the correct operation of the camera. You may have to uninstall apps one by one while looking for the culprit until the problem goes away.

Method 2: Disable voice control "OK Google".

In the course of searching for a solution to the problem, it was possible to find out that the setting " OK Google on any screen", That is, the ability to access Google from any screen by saying the command" OK Google "means the constant inclusion of the microphone. This appears to be causing the error "Camera app is recording audio. Com.google.android.googlequicksearchbox: interactor cannot be used for audio recording at this time", as well as many problems in other applications.

Go to Settings -> Google Panel -> Search (Select Voice Search) -> OK Google Recognition. Disable the item according to which you can access Google from any screen.

Method 3: Disable voice calling of subscribers.

Disabling the voice call function of subscribers can also help in solving the problem. To do this, go to "Settings" -> "Voice control" -> "Quick call" -> disable the function.

The user Huawei P9 who proposed this option reported that the error occurred after updating the OS from Android 4.0.1 to and suggested that the voice call and "OK Google" simultaneously keep the microphone in a ready state, and the connection of the third option (camera) to the smartphone is no longer possible ... Therefore, by disabling any of the first two, you can not be afraid of an error.

Method 4: Block Google Apps from Accessing Microphone

Unfortunately, method 3 does not help everyone - sometimes the problem returns, but the user still has to say goodbye to “OK Google”. If you are not too attached to “OK Google” and rarely use fast voice calls, it is easier to completely refuse. in google apps access to microphone... ("Settings" -> "Applications" -> "App permissions" -> use the slider to disable access to the microphone for Google applications).

If these or other methods helped you fix the error "The Camera application is recording audio. At the moment com.google.android.googlequicksearchbox: interactor cannot be used for recording audio", please share your experience in the comments.

Many Huawei device users encounter the "Camera app is recording audio" error when turning on the camera. At the same time, the error notification makes it very difficult to take pictures with the camera.

The full text of the error looks like this: “The Camera application is recording audio. Currently com.google.android.googlequicksearchbox: interactor cannot be used for audio recording. " After closing the error notification, it reappears.

How to get rid of the error "The Camera application is recording audio"

1) Disable recognition "Ok, Google" on any screen.

As you know, the phrase "Okay, Google" launches a voice search and allows you to perform various actions on the device, for example, you can turn Bluetooth on or off using your voice, and so on. If the Google app is configured to recognize the phrase “Ok Google” on any screen, this makes your device's microphone keep working. In addition to the fact that enabling this feature may result in increased battery consumption, on Huawei devices this causes an error when working with the camera. Therefore, this function should be disabled. For this:

1) open the app "Google" and pressing the button "Menu" choose "Settings";

3) disable the function "On any screen".

If, for some reason, the first method did not help you, and the "Camera application is recording audio" error still appears, you can do otherwise. On the Android OS, there are permissions that give the application the right to perform certain functions on the device. The error will most likely disappear if you prevent Google applications from using your device's microphone. However, in this case, you will not be able to use voice control. To prevent Google apps from accessing the microphone:

1) go to "Settings" and select a section "Applications";

2) press "App Permissions" and choose "Google";

3) in paragraph click Deny.

Yandex.Navigator is one of the most popular navigators for Android OS in Russia. The application boasts rich functionality, an interface entirely in Russian and the absence of intrusive ads. Also, an indisputable plus can be called the fact that it is absolutely free. The rest of the article will tell you how to use Yandex.Navigator on your smartphone.

After reading the material below, you will learn how to set up the navigator, get directions online and offline, and use its additional tools in case of unforeseen situations on the road.

Step 1: Install the app

To download Yandex.Navigator to your Android smartphone, follow the link below, click on the button "Install" and wait until the application is downloaded to your smartphone.

Step 2: setup

In order for the navigator to be convenient to use, you need to customize it for yourself. Therefore, after installation, go to Yandex.Navigator by clicking on the application icon on the desktop of your smartphone.

On the first launch, two requests for permission to access the application to geolocations and a microphone will pop up on the screen. For correct operation of Yandex.Navigator, it is recommended to give your consent - click "Allow" in both cases.

After you confirm the permissions, the map opens with an arrow icon indicating your location.

Then click on the button "Menu" in the lower right corner of the screen and go to "Settings"... First there will be a column of settings related to the map. Let's consider only those of them that really affect the use of the navigator.

Go to the tab "Map view" and choose between standard street and road map or satellite. Everyone sees maps differently, but schematic maps are more convenient to use.

To use the navigator offline, go to the menu item and click on the search bar. Next, select the proposed maps of countries, regions, territories, cities and numerous provinces, or use the search, writing the name of the area you need.

To change the icon of your location, go to the tab "Cursor" and choose one of the three options.

Another important column of settings is "Sound".

To select the language you are interested in, in which the navigator will show you the route and other information about the road, go to the appropriate tab and click on one of the proposed languages. Then, to return to the settings, click on the arrow in the upper left corner.

To select a voice assistant, go to the tab "Speaker" and choose the voice acting you are interested in. There will be standard male and female voices in foreign languages, and six positions are available in Russian.

For complete convenience, it is advisable to leave the remaining three items on. Voice activation helps you plan your route without leaving the road. It is enough to pronounce the destination address after the command "Listen, Yandex".

This concludes the basic settings for the convenience of using the navigator. There will be a few more points at the bottom of the parameter list, but they are not significant enough to draw attention to them.

Step 3: Using the Navigator

After that, you just have to go according to the announcer's instructions. But don't forget that this is a technique that can sometimes be wrong. Pay close attention to the road and traffic signs.

Yandex.Navigator can also show traffic congestion so as not to get stuck in a traffic jam. To activate this function, in the upper right corner, click on the traffic light icon. After that, the roads of the city will become multi-colored, which indicates their congestion at the moment. Roads come in green, yellow, orange and red - the gradation goes from free roads to long-term traffic jams.

For the convenience of the user, the developers of Yandex.Navigator have added a function for specifying comments on road events that are available to any driver or pedestrian who is not indifferent to accidents. If you want to add an event, click on the triangle icon with a plus inside.

A list of pointers will immediately open at the top of the screen, which you can place on the map with any comment. Whether it is an accident, road repair, cameras or any other incident, select the desired sign, write a comment, hover over the desired place and click "Install".

Then a small pointer will be visible on the map at this location. Click on it and you will see information from the user.

Recently, a function for displaying parking lots has appeared in Yandex.Navigator. To activate it, click in the lower left corner on the button in the form of an English letter "P".

Now on the map you will see all the parking spaces available in the locality where you are. They will be highlighted with blue stripes.

At this step, the main work with the navigator ends. Additional features will be discussed below.

Step 4: Working offline

If you don't have the Internet at your fingertips, but you have a working smartphone with a GPS receiver, then Yandex.Navigator will help you to get to the desired point in this case. But only on condition that the maps of your area have already been downloaded to the smartphone or the route you have built in advance has been saved.

With the available maps, the route building algorithm will be similar to the online mode. And in order to save the required route in advance, click on the button "My places".

The next step is to specify your home and work address, and in the line Favorites add those addresses where you often go.

Now to use the application offline with preloaded maps, say the voice command "Listen, Yandex" and indicate or manually select the place where you want to get a route.

Step 5: working with tools

The menu has a group of tabs called "Instruments", and a few of them may be of use to you. They work only with an active Internet connection on your Android smartphone.

This concludes our instructions for working with the application. There are many interesting and long-standing solutions of this kind, but Yandex.Navigator bravely keeps among them in good standing with many users. Therefore, feel free to install it on your device and enjoy it.

After the recent automatic updates of Android, many users have had problems with applications, for example, when recording a video, the notification “Application com.google.android.googlequicksearchbox: search is recording audio” constantly pops up, indicating that the camera cannot be used. When launching other programs (WhatsApp, Kate Mobile, Viber), a similar error appears, only with the indication of interactor. We will tell you why this error occurs and how to fix it.

Reasons for the error

Error com.google.android.googlequicksearchbox: interactor Is a system notification that appears due to the automatically launched Google search options in Android. Actually, after the update, a new mode appeared in "Ok Google", which enables the search option on the active screen of running programs.

Suppose you turn on the camera, which has access to the microphone, at the same time "Okay, Google" also requests access to the microphone so that the user can voice control of the camera - hence the conflict and failure. This also happens when you launch instant messengers, Yandex.Navigator, Shazam and other applications.

Also, simple notifications "An error has occurred in the application" are possible, which appear when there are no active applications. This is due to an attempt to connect to the search services on the phone.

Removing the error

Fortunately, there is no need to perform a factory reset or new firmware to remove such problems. Everything is cleaned up in Google settings on Android. So, review and disable the following options:

So, the conflict error "Application com.google.android.googlequicksearchbox: interactor cannot be used" can be removed in the settings, or by demolishing updates. Such conflicts are associated with dampness and beta tests of new versions, which, fortunately, are quickly fixed by the developers. If you have any difficulties with disconnecting and questions, write about them in the comments below, we will try to help.

The Yandex application is used by many residents of Russia. The caste of motorists was no exception. This program, by the way, has always shown itself from an excellent side and has earned the respect, as well as the unshakable trust of many smartphone users. Despite this, a number of developers' mistakes, which provoked extremely unpleasant phenomena, “tarnished” the solidity of Yandex Navigator.

In particular, an error in the program code became such an imperfection, which provoked the constant recording of ambient sounds in one of the local application folders. Noticing something amiss, many Yandex navigation users sounded the alarm, wanting to find out the cause of the problem as soon as possible. What they did, we will talk about this in more detail and not only in the article below.

A few words about Yandex Navigator

Before looking at application errors, let's take a look at what it basically is. In general, Yandex Navigator is a completely authored navigation program from the manufacturer of the same name. This application was built on the basis of Yandex Maps, but it has also been significantly modified. The main difference between the Navigator and the Maps is that the first program has a more navigational bias than the second.

Thus, it turns out that Yandex Navigator is a full-fledged application, the use of which is aimed at obtaining a high-quality navigation service... The main functions of the program are as follows:

showing the user a map of his place of stay and other territories where he wants to plot a route;
formation of the best and fastest route in a given direction;
providing voice assistance to the car driver while driving along a given route;
providing the user with all the information about the presence of traffic jams in his places of stay and, in general, about the traffic situation there.

Today Yandex Navigator is a free application with the possible purchase of additional functions for money. The program manufacturer often releases various updates that help fix existing errors in the application and add something better to it that it did not have before.

Important! Yandex Navigator has exclusively original program codes that form a permanent and completely individual concept of navigation. Largely because of this, this application is one of the most used in Russia and the CIS countries.

Why does the program record audio

"Yandex Navigator is recording audio !!!" - with such a sensational statement in September 2015, the user of the social network Facebook, Evgeny Strokin, excited the public. By the way, this news was not a "yellow duck", but the real truth. Why did this happen, what events are behind it? Let's figure it out.

Immediately, we note that there is no espionage in the fact that the Yandex Navigator application records audio, no. A similar phenomenon was triggered in one of the versions of the programs, which was updated for September 2015, an ordinary software error. More precisely, the fault was caused by the error debugger not remote by the programmers, which writes the user's audio commands to a separate system folder. And a similar debugger was created so that program manufacturers could test and correct the sound assignment of commands from the user to the application in a more convenient mode. In the final version of the update dated September 5, 2015, this debugger should have been removed, but Yandex programmers simply forgot to do it. The culmination of all was the release of "spyware" into the world and its download by hundreds of thousands of users ... Serious and rather stupid mistake of such a solid company, isn't it?

Many will ask themselves the question - "How did the user of the program notice the error?" Everything is simple here. The fact is that the audio recording error in Yandex Navigator had one pronounced feature, or rather, the resulting audio file was recorded in a separate system folder and was not deleted, but simply clogged up the memory. As a result, users, a couple of hours after switching on, discovered that the memory of their device had disappeared somewhere, or rather, was busy with something. The first to reveal that it was in Yandex Navigator was the previously mentioned Evgeny Strokin, who sounded the alarm about dishonesty and possible espionage by the application. Fortunately, the error in the program did not carry any malicious intent. Many checks on the erroneous version of the program and statements by Yandex itself confirmed that The navigator did not send the recorded audio data anywhere, but simply stored it on the device. Whether to trust Yandex applications after that - everyone will decide for himself.

Other Yandex Navigator errors

As noted earlier, Yandex Navigator is often corrected by the manufacturer if there are some errors in the application. If the phenomenon with audio recording was of a one-time nature and was quickly corrected, then some program errors do not appear so rarely. Which of this brings inconvenience to the users of the program? Read below.

So, having analyzed all kinds of complaints about bugs in Yandex Navigator, our resource has identified three main errors and presented them with the following list:

Mistake No. 1 - Formation and display of not entirely correct route. A similar bug in the work of the application occurs with enviable regularity (far from one-time, as with audio). The essence of such an error is that Yandex Navigator, analyzing the optimal path to the point specified by the user and forming the route itself, chooses some incomprehensible path. The "incomprehensibility" of those lies in the fact that they are, firstly, not the shortest and, secondly, extremely inconvenient for a motorist to travel. Fortunately, if such a mistake occurs, it is corrected the very next day after its appearance and can only seriously spoil the mood of the Yandex navigation user a couple of times.
Mistake number 2 - The presence of inaccurate information in the People's Card. This bug is systematic and can lead the user to real confusion, but it will not be possible to get rid of it. The fact is that the People's Map in Yandex Navigator is formed by the users of the application themselves and requires careful moderation, but moderators are also ordinary people who do not always have time to notice the incorrect design of maps with the proper speed and correct the error in time. With such a bug, the program can only be measured.
Mistake number 3 - Incorrect display of the traffic situation. Here the situation is similar to the situation with the People's Card. Application moderators do not always have time to quickly track this or that traffic jam and enter it into the Navigator itself, and sometimes a rush in this matter leads to the fact that a traffic problem is indicated on the street on which it really does not exist and is not expected ... Fortunately, this problem is infrequent and gets fixed rather quickly.

Otherwise, the Yandex Navigator application is a solid and well-made navigation program. No wonder the "army" of its users is huge on the territory of the post-Soviet space. We hope that the material presented today was useful to you. Good luck on the road!

Yandex Navigator review: