How to change sleep mode windows 8. How to use sleep mode in windows or disable it altogether

And again I welcome you, dear readers of my blog. Glad to see you again on the pages of my blog. Today is a day off, which means you can sleep well. By the way, do you know that even though a computer is a machine, it also wants to sleep. At least that's how it's set by default. Of course, if he is not used for some time, then he falls asleep, i.e. as if it turns off, but then you can wake it up and continue working.

But I know firsthand how sometimes this computer sleep annoys people and people at work just cry (not in the literal sense of course) and don’t know how to remove sleep mode in windows 8 or 7, but at least in XP. The algorithm is the same everywhere.

Of course, sleep mode is sometimes a very necessary thing, because thanks to it, the computer practically does not consume resources and rests if you are lost somewhere. True, some users really do not like it when the computer goes into this mode and takes their “sleepy” friend out for a long time, while shouting at him.

By the way, in order not to poke on the buttons, it is very easy to wake the computer from sleep mode. You need to press the power button once. That's all)

Well then. Let me show you an easy way to disable sleep mode. You need to do the following:

Here is such a simple and effective way to get rid of the terrible sleep mode. In general, if you study windows well, you can simplify and optimize all work at the computer so much that it’s just a fairy tale. That is why I recommend you to watch this wonderful course by windows. After watching it, you will not only ask how to do what, but you yourself will advise everyone on these issues.

By the way, if you perceive video better than text, you can watch my video about sleep mode below.

And I'm done for today. Hope everyone got it right. Although what am I talking about? Of course everyone did it. Well done. Don't forget to subscribe to my blog posts for more updates. See you in the next lessons! Bye Bye.

Sincerely, Dmitry Kostin

What is the difference between sleep and hibernation modes?

Sleep mode in Windows 8, a low power state of a computer in which a piece of hardware ( HDD, matrix) is disabled, and the rest is suspended. Open documents and other data will be stored in RAM. The system in this mode can be returned to working condition as quickly as possible.

hibernation- this is saving the current session to a special file on the hard disk - hiberfil.sys and then turning off the PC. When you exit hibernation, the hiberfil.sys data is loaded back into RAM, and you can continue working from where you left off. This mode is designed for laptops, as it saves battery power.
Hybrid Sleep combines both of the previous ones. A session in this mode is saved both in memory and on the hard drive. If during the idle time the PC does not turn off the power - the session is restored from memory, if it happens - with hard drive. Hybrid sleep is designed for desktop computers. If it is enabled, hibernation becomes unavailable and disappears from the list of ways to turn off the PC, as in this example:

How to "wake up" the computer?

In most cases, to wake the PC from sleep or hibernation, you need to press the Power button on the case once. But on some models, you need to do something else to do this - press a key on the keyboard or open the laptop lid.

How to disable hibernation on Windows 8?

You can turn off sleep mode in Windows 8 through the system metro app "Computer Settings" or the control panel.

The first way (through the control panel)

Press the keyboard shortcut Windows + I (to open the list of options in the Charms bar) and select "Control Panel".

Or open the context menu of the Windows button and click the appropriate item.

Open the Hardware and Sound category in Control Panel.

And then - the section "Power supply".

Click the "Sleep Settings" sidebar.

Expand the "Put PC to sleep" drop-down list and select "Never". Click the "Save Changes" button.

You can turn off sleep on your laptop even faster. To get to the settings, click on the battery charging icon in the system tray,

click "Advanced power options"

and select "Never" from the same list. Here, as you can see, you can disable sleep mode both when powered from one source (mains or battery), and from both.

Second way

The previous method is suitable for different versions Windows ("seven", vista, "eight"), and this one is only for Windows 8, since there are no metro applications in predecessor systems.

To disable sleep mode, do the following:

Press the combination Windows + I and click at the bottom of the "Change PC settings" panel.

Click on the "Computer and Devices" menu.

Open the "Shutdown and Sleep" section and expand the "Sleep" drop-down list.

Select "Never" from the list. The setting will take effect without confirmation.

The same actions will help disable the transition to hibernation, if it is active.

What to do if a Windows 8 PC does not go into sleep mode or wakes up spontaneously?

We prohibit devices from "waking up" the computer

Various devices can wake up the computer, especially those connected via USB (mice, flash drives, etc.). To prevent them from doing this without your knowledge, do the following:

1. Install latest versions drivers for the motherboard chipset and the devices themselves (if they work with separate drivers).

2. Open "Device Manager" in one of the ways:

Expand the context menu of the Windows button and click on the appropriate item.

Press the key combination Windows + F (to launch the search function) and enter "device manager" in the search box. Open the found file.

3. Select "Properties" in context menu connected device (in our example, it is a mouse).

The computer enters sleep mode when it has not been used for a while. This is done to save energy, and is also especially convenient if your laptop does not work from the network. But many users do not like that they should move away for 5-10 minutes from the device, and it has already gone into sleep mode. Therefore, in this article we will tell you how to make your PC work constantly.

In this version operating system this procedure is practically no different from the seven, but there is another method that is unique to the Metro UI interface. There are several ways you can undo your computer from going to sleep. All of them are quite simple and we will consider the most practical and convenient.

Method 1: "PC Settings"

Method 2: "Control Panel"

Using the charms (panel "Charms") or the menu Windows + X open "Control Panel".
Then find the element "Power".

Interesting!
You could also get to this menu using the dialog box "Run", which is very easy to call with a key combination Windows + X. Enter the following command there and press Enter:

powercfg.cpl

Now opposite the item that you have marked and highlighted in black bold, click on the link "Setting up the power plan".

And the last step: in paragraph "Put your computer to sleep" select the desired time or line "Never" if you want to completely disable PC sleep. Save your change of settings.

Method 3: "Command line"

Not the most convenient way to disable hibernation is to use "Command line", but it also has a place to be. Just open the console as an administrator (use the menu Windows + X) and enter the following three commands into it:

powercfg /change "always on" /standby-timeout-ac 0
powercfg /change "always on" /hibernate-timeout-ac 0
powercfg /setactive "always on"

Note!
It is worth noting that not all of the above commands may work.

You can also disable hibernation using the console. Hibernation is a computer state very similar to Sleep mode, but in this case, the PC consumes much less power. This is due to the fact that during normal sleep, only the screen, cooling system and hard drive are turned off, while everything else continues to work with minimal resource consumption. During hibernation, everything is turned off, and the state of the system before shutdown is completely saved on the hard disk.

Type in "Command line" the following command:

powercfg.exe /hibernate off

Interesting!
To enable hibernation again, enter the same command, just replace off on the on:

powercfg.exe /hibernate on

Here are the three methods we have considered. As you can see, the last two methods can be applied on any version of Windows, because « Command line» and "Control Panel" is everywhere. Now you know how to disable sleep mode on your computer if it bothers you.

Manage sleep and hibernation, change advanced power settings, and improve battery life on mobile devices. You can change the sleep and hibernation settings of your PC under Windows 8.1 after clicking on the page " Changing Schematic Options» Options « Change advanced power settings". . The same option is available in other sections of the power options.

What is the difference between sleep and hibernation? When you put your computer to sleep, it saves all information in RAM before shutting down. As a result, when you turn your computer back on, it starts very quickly, and exactly at the point where you sent it to sleep. After all, you do not need to read information into the computer's memory, it is already there.

Hibernation writes the contents of memory to a file on the hard drive. This means that when you turn off the computer, the work will not be lost, but the startup will not be so fast.

Advice. Enable command " hibernation» in Windows 8.1 you can in the menu « Power supply" by clicking on the option " Power button actions", on the left side of the window, and then " Change options that are not currently available". At the bottom of the screen, you will see the section " Shutdown Options”, and the hibernation function is available for change. After enabling the command, it will become available in the shutdown menu and by hotkeys Win + X.

When viewing sleep settings, you will see an option to change advanced power settings. Here you'll see a lot more customization options already (click the "Change settings that are currently unavailable" button).

Some of these options can be very useful:

Hard drive: Why might you need to unplug your hard drive? Hard drives consume a lot of energy. Perhaps you have several hard drives on your computer and most of the time they are used only for storing files or for Reserve copy. Windows installation 8.1 shutting down unused hard drives reduces the overall power consumption of your computer. Any hard drive in use still has power.

Remember, if you want to access a powered off mechanical hard drive, it will take some time as it needs to spin up.

Advice. If you do not want to use any timings in advanced power settings, change the default time to 0 (zero).

Adapter Options wireless network A: Wi-Fi and mobile broadband are a huge waste of power for a laptop, ultrabook, or tablet, as they turn your computer into a radio transmitter and receiver. If you change the default settings for locations where you have a strong signal, you will still get a good signal, but your computer will use less power to power your Wi-Fi system.
Sleep Mode: You can fully enable or disable sleep and hibernation if they are causing problems on your computer.
USB Settings: If your computer is connected to computer-powered USB devices - perhaps an external hard drive or optical drive - you can enable a setting that will turn off power when the device is not in use. This option can significantly extend the life of a portable computer, such as an ultrabook.
Display: In the power options, you can choose when to turn off the monitor, and here you can fine-tune the amount of display dimming when turned off and brightness when turned on. If your computer comes with a built-in light meter, you can turn on adaptive brightness control, which will automatically change brightness based on ambient light.
Battery: The battery options allow you to set what Windows 8.1 sees as low and critical battery levels. If you have a new battery and don't want annoying reminders, set the low battery level to 10%. However, if you often walk away from a battery-powered computer, it makes sense to set automatic hibernation when the battery is low.

Extend battery life on mobile devices.

If you're using a laptop, ultrabook, or tablet on the road and want to maximize their battery life, there are certain things that make sense.

Reduce screen brightness as much as possible. The less power required to display an image, the longer the battery lasts. Your screen is a major energy eater.
Turn off the keyboard backlight (if you have one), this will also save energy.
Set the screen to turn off after two minutes of inactivity, and possibly set the device to sleep after 10 minutes.
If not needed, turn off Wi-Fi, cellular (3G/4G/LTE) or Bluetooth connections.

On a laptop or tablet, it may make sense to turn off the screen after a couple of minutes of inactivity. Screen mobile device the most energy intensive component. Turning it off quickly enough will significantly extend battery life.

You can also turn off unused features such as 3G and GPS, which use power to search for and receive radio signals. In addition, Windows 8.1 has a feature that turns off the power of all connected USB devices, which also drain your computer's battery.