Rostelecom is it possible to connect a second TV box. Connecting a second TV to a Rostelecom set-top box

Today it is difficult to surprise someone with several TVs in the same living room, but many users have a question how it is possible to connect a second TV to Rostelecom without a second set-top box. Of course, we are talking about a new proposal of the largest provider of communication services - interactive television (IPTV). Most modern TVs have the ability to view media files over the Internet, and with the advent of a new service from Rostelecom, users' capabilities have been significantly expanded.

Interactive television is a real breakthrough in the development of telecommunications. The service offered by Rostelecom assumes the ability to view more channels, and in the best quality. In addition to watching movies, there is a unique opportunity to rent movies, users can also use a huge collection of karaoke and record their favorite program. This can be done both on your own media and on a set-top box if you opt for a more expensive device with a built-in hard drive. By the way, it is the purchase of a receiver that is the main condition for the provision of the service. You can connect it either yourself, following the instructions, or with the help of a technician from a company that is a service provider.

Receiver connection

If you decide to use the interactive television service from RTK, it is enough to visit the company's office, buy one of the two device options and pay a monthly fee. After a short time, the service will be activated, and all you have to do is connect the device. This is not difficult to do, but some difficulties may arise.

Remember: in order to use a TV tuner, you must have high-quality Internet access, connecting cables and the remote control of the TV receiver and set-top box. Cables, all kinds of adapters and a remote control are included, so it is highly advisable to check the package contents upon purchase.

You can connect interactive television using one Rostelecom set-top box in three ways: using an Internet cable, via Wi-Fi and using PLC adapters. It will be easier and cheaper to connect via cable, so we suggest considering this option in more detail:

Important: most modern plasma and LCD TVs have an input for an HDMI cable, so if it was not included in the package, you will have to buy it additionally. This will significantly improve the quality. This is especially true if you decide to connect a TV tuner from Rostelecom to two TV receivers at the same time, and this is possible.

Setting up the prefix

After plugging the receiver into an outlet, it remains to make the necessary settings, for which the TV receiver's remote control is switched to video mode, where all the necessary settings are made. First of all, the system will ask you to enter your username and password for your account - you can find this data in the registration documents. If you think that further tuning is to be done, then you are wrong - the system will do everything for you, and the user will only have to choose one of the offered channels.

Ways to connect a second TV

Given the presence of several TV sets, I would like to separately discuss the possibility of connecting a second TV set to the Rostelecom set-top box. The ideal option, of course, is the second prefix, but not every family's budget can handle such waste. Therefore, users have to decide how to connect a second TV and use only one set-top box from Rostelecom.

This is important: if you have one interactive TV receiver, it is technically possible to connect a second TV signal receiver, but this is if all family members agree to watch only one channel at a time. There is no other way to connect and connect a second TV, except for the purchase of another receiver.

We connect two TVs to one set-top box

In the event that you are ready to come to terms with the opinion of others regarding the uniformity of the TV menu, you can start connecting two TVs to one Rostelecom set-top box, and you will now find out how to connect. First of all, you need to examine the receiver itself, and, most likely, the jack for connecting the HDMI cable is already occupied. In this case, you have to use the adjacent jack for the RCA cable. Most likely, to watch TV channels from Rostelecom through 2 devices, you will need to buy this cable. This is necessary in order to connect the second TV receiver to the set-top box.

How to connect a second set-top box

Most likely, representatives of different generations will not agree to watch one channel, so you will have to visit the RTK office and ask if it is possible to connect two TVs. You will be offered to buy a second TV tuner and sign an appropriate agreement with the provider. Fortunately, you don't have to buy another router if your device has free LAN ports, of course. You will need a cable to connect to the Internet, check for cables. Further steps are similar to what you would do for one receiver. If you decide to connect a second set-top box from Rostelecom to a second TV, remember only that each TV tuner is tuned to its own TV receiver.

The generation of modern TVs with a ton of additional options allow you to watch movies and programs in maximum quality. Provider RTK offers its customers Interactive TV - television over the Internet. At the company's office, you can purchase a compact device for accessing the service with included channel packages. In this article, we will analyze in detail how to connect a Rostelecom TV set-top box to a TV. If you have 2 TVs that need to be connected to a TV, then in this article you will find answers to questions about connecting a second Rostelecom set-top box.

TV set-top box Rostelecom - connection

Important: everything necessary for the operation of the device is supplied in the kit. Therefore, when purchasing the device, check if all cables are in place. You can read about the complete set in the user manual, which is inside the box with the receiver.

Connection diagram of the Rostelecom set-top box

Connect the TV receiver to your TV using an HDMI cable. The Internet router is connected with an Ethernet cable to the LAN connector. Connect the supplied power adapter to the device, plug into a power outlet.

If the TV does not have an HDMI connector, then connect it to the TV receiver using an AV adapter. If there is only a SCART connector, then the necessary adapter is also supplied in the kit.

How to turn on the TV set-top box Rostelecom

If the service is activated by the provider, then turn on the TV using the “native” one, and the device using the universal remote control (included in the package). If the connection of the Rostelecom set-top box to the TV was made correctly, a splash screen will appear on the screen, the download of the latest software version will start, after which you will be able to read the terms of the Offer - they must be accepted. Next, the start menu will appear on the TV screen - the device is ready for operation. You will find all available functions in the program menu. Read more about each of them, opportunities and benefits on the RTK website.

When turning on, on the TV you need to select the connection type corresponding to the connector to which you connected the TV receiver (HDMI, AV or SCART).

Additional Information

If you need to know how to connect a Rostelecom set-top box to two TVs, then this is quite simple to do. Connect the HDMI cable to the first TV and AV to the second. Insert each wire into the corresponding connector. If the length of one of the supplied wires is not enough, then you can purchase it in the required quantity at any electronics store.

Important: this connection option involves broadcasting one channel on both TVs. If you want to watch different programs on each screen, then you need to purchase a second set of equipment.

How and where to install the Rostelecom prefix, and what operating conditions to observe is written in the user manual. In order for the device to serve for a long time and not to cause connection problems, as well as to avoid repair costs, it is necessary to carefully read the instructions before installation.

If you are interested in the question of how to connect a Rostelecom set-top box to a computer, then using cables and a standard connection is not possible. If you are a user of the company's services connected to Interactive TV, you can download the IPTV program for your computer and enter the user data in the registration fields. You will have access to almost all channels broadcast on the TV.

There is one more convenient service - the Zabava application. It is available for download on any device - smartphone, tablet, PC. Register your user details and enjoy TV anywhere. You don't have to download the application - just go to the Zabava.ru web page in a browser and log in as a client of RTK. Here you can watch TV online, buy watching movies you like. High quality video is guaranteed.

Connection of the second set-top box Rostelecom

If you have 2 TVs in your house, and you want them to broadcast channels independently of each other, then the only option is to connect two set-top boxes of the provider Rostelecom, as is the case with any other provider providing similar services.

The Internet router has 4 LAN outputs. Accordingly, you can connect a second Rostelecom set-top box to it as well as the first one. For example, connect the first TV to the corresponding receiver, connect it to the router via LAN1 (according to the scheme described above), the second to LAN2. Here you will most likely need an Ethernet cable longer than the supplied one, so purchase the required length in advance.

Attention: make sure there is sufficient Internet connection, as the used traffic with two working set-top boxes increases significantly, there may be interference in the broadcast, as well as some disruption in the Internet.

If you have any difficulties, you can call the technical support service of the service provider at 8 800 300 18 00. The operator will tell you how to properly connect 2 Rostelecom set-top boxes, and if something went wrong, he will help you figure it out in the problem. Experts advise not to perform any actions on your own if the device suddenly began to work incorrectly or stopped functioning altogether. Describe the problem to the foreman by phone, and he will make a decision to fix the problem. It is possible that with its help you can solve the problem yourself.

Today Rostelecom is one of the largest providers of telecommunications services, offering the widest range of favorable tariffs that determine the number of channels offered to subscribers. The higher the payment cost, the wider the list will be. But not everyone knows how to connect television from Rostelecom using special equipment.

How to connect TV from Rostelecom

Concluding an agreement with the company, paying the desired tariff and getting the necessary equipment from the provider is not enough for the availability of views. The first step is to correctly connect and adjust the existing devices accordingly.

Equipment

A subscriber wishing to connect to interactive television receives a set of appropriate equipment, consisting of the following elements:

set-top box - the main device providing access to UltraHD, as well as HD TV;
control panel - provides control of the attachment;
power supply block - contributes to the inclusion of the set-top box, as well as its uninterrupted operation;
cable - connects the router to the set-top box.

For users with more modern television equipment, an HDMI cable is perfect, owners of older TVs will need to get an RSA cable.

Connecting a set-top box

Proper connection of equipment will be the initial stage in setting up your TV. Therefore, we will clarify how Rostelecom television is connected, which provides high-quality viewing of channels. Using the supplied power supply, the device is connected to the mains. After that, he is provided with access to the Internet, which can be done in different ways:

wireless networks using a Wi-Fi adapter, which will have to be additionally purchased;
using a direct connection with a network cable, which is the most reliable.

Such a cable must be included in the package.

How to connect television from Rostelecom - setting up television

After successfully connecting the set-top box, the television is set up, which even ignorant subscribers can easily cope with. To do this, the TV connected to the network is set to AV mode, or, in the case when the connection was made with an HDMI cable, the corresponding mode is set. This should provoke the appearance of the set-top box menu on the screen, which is controlled by the remote control contained in the kit.

First of all, to enter the set-top box, you will need to register the login and the corresponding password, which are in the agreement that was concluded with the provider. After correctly entered data, a menu of offered channels pops up on the TV screen.

How to do without a prefix

If you have no idea how to properly connect Rostelecom television without using a set-top box, then the following information will be useful for you. Rostelecom has an online service that allows you to watch movies and TV shows in excellent resolution quality. The interesting thing is that it is able to work with any browser installed on your computer. This service is paid, like the television of Rostelecom itself.

However, this option is most optimal if your home is not maintained by the provider. This connection allows you to watch TV from any PC in the house, as well as connect it to a TV using an HDMI cable, which greatly expands the possibilities. The monthly payment for access to TV channel views will depend on their direct number.

By concluding a contract for the Interactive TV service, Rostelecom subscribers most often get their hands on a set of equipment right away. But the company usually appoints the technician's exit for its initial setup in a day or two, and residents of the suburbs sometimes have to wait a whole week. Don't want to waste so much time? We will tell you how to connect digital television from Rostelecom, and whether it can be done without the help of masters. Knowledge of connection diagrams and tuning technologies will also come in handy for experienced subscribers, for example, when buying a new TV set or moving equipment to another room.

What is included in the set of digital television from Rostelecom

Rostelecom provides its subscribers with two options for digital television services - "" and "Interactive TV 2.0". The main difference between them is that version 2.0 can be paired with the Internet from any provider. An earlier package requires that the router for digital TV and broadband access belongs to Rostelecom. To connect to version 2.0, we recommend that you still wait for the company's technicians to avoid problems with possible incompatibility of equipment settings from different providers. It is also better to wait for the masters if you connect the Internet and interactive TV at the same time.

If you already have a router from RTK installed and running, Rostelecom's digital television equipment can be configured independently. The basic kit includes a set-top box, a network cable and a universal remote control. If desired, the cable can be replaced with a video sender or Wi-Fi adapter, but the initial setup should still be done with a cable connection.

Rostelecom offers set-top boxes for digital television in two versions - "Standard" and "Premium". Any of them can be used with both versions of Interactive TV, and they are set up in exactly the same way. The only difference is that premium equipment is complemented by a built-in 500GB hard drive and supports 3D technology. Well, in cost, of course. But no matter what set of equipment you choose, the connection algorithm will be the same.

Connecting a digital TV set-top box Rostelecom

You should not try to install an STB set-top box on the day of concluding an agreement with Rostelecom. It takes time for the provider to process your documents, internal work with equipment and add a new service to your personal account. Typically, these operations take about 24 business hours, and until they are completed, digital TV will not work for you, even if you made all the settings correctly. To clarify whether the service has been linked, you can in the Rostelecom contact center at 8-800-1000-800.

If the CC operator has confirmed the availability of interactive TV to you, you can start installing the set-top box. In general, Rostelecom's digital television connection diagram will look like the picture.

After that, connect STB to TV using tulips or HDMI cable. The latter is not always included in the kit provided by the provider. But if your TV model supports this technology, it is better to purchase this cable additionally in order to provide a clear picture and maximum sound quality when using the service. When all the cord connections are in place, you can plug the power plug of the set-top box into an outlet.

How to set up digital TV from Rostelecom

The next step is setting up digital television. Turn on the set-top box and the TV, and using the remote, put the latter into AV mode. If you used an HDMI cable, then in the menu that appears, specify this particular signal source.

A splash screen will appear on the TV screen, indicating that the Rostelecom set-top box for digital television has started downloading. This process takes about a minute. After its completion, the equipment will ask you to enter your login and password to use the service. You can take this data from the contract concluded with the provider. The login and password will necessarily be completely digital, since they are entered from.

After identification, the settings menu (or a list of channels, depending on the STB model) will appear on the screen. This will mean that the connection was completed successfully. At this stage, you can already use all the functions of interactive TV. But for ease of use, we recommend that you carry out additional configuration of the remote control.

Setting up the remote for interactive TV

After connecting the Rostelecom digital TV set-top box, you need to check if the remote control attached to it is synchronized with your TV. Without synchronization, even such simple actions as turning the TV on and off or adjusting the sound from the set-top box's remote control will not be possible. They will have to use the TV remote control, which is not always convenient.

There are two ways to synchronize the remote control from the Rostelecom set-top box for digital television with a TV of any model - enter the synchronization codes manually or trust the automation. Let's first describe the easiest, automatic option.

Plug the equipment into a power outlet, after loading it, press the TV and OK buttons on the STB remote control. As soon as the diode on the first button lights up and goes out two times - you can perform the setting, the remote control is switched to the programmed mode. Type 991 on the numeric keypad and press the key that scrolls through the channels.

With each subsequent press of this button on the remote issued by Rostelecom, the digital television codes will be set. The device will start sorting through the synchronization codes embedded in it, sending the TV to turn off the signal.

If the TV turns off, it will mean that the code has been matched. To save it, press OK on the remote. The diode under the TV key should go out twice and light up again, signaling that the parameters have been saved. After that, you can turn on the equipment again and try to control the sound on the TV using the remote control from the Rostelecom set-top box. If it works, it means that the synchronization was done correctly.

Owners of rare or outdated TV models, when connecting digital TV to Rostelecom, may need to manually configure the remote control. To do this, you need a hardware sync code. You can find out the meaning of the code on the Rostelecom website.

Go to the "For yourself" section, then the "Support" menu, the "Interactive TV" submenu. Find the link "Equipment" on the page and follow it. In the new window, scroll down the page until you see an image of the remote control. A list of codes will be attached below it. Find your TV model in it and remember the numbers next to it.

If for some reason you cannot get to the site, contact the company's support service. The operator will prompt the required numbers. After that, put the remote control into the settings setting mode, as described above. But after the TV button blinks twice, do not press the channel switch key, but enter the code that you spied on the list from the numeric keypad. The TV should turn off.

Note: Each TV model has several sync codes. If one of them did not fit, go through the rest of the combinations.

Common IPTV mistakes

Even if configured correctly, equipment may malfunction from time to time. Most often, complaints about the fact that Rostelecom's digital television does not work come from new subscribers who have not gotten used to the procedure for providing the service. So, if you see that only 10 channels are available for you to view, and the rest for some reason do not work, in 99% of cases this means that you have overdue the invoice for payment.

Check the balance on the TV service, pay off the debt, and within 24 hours broadcasting will resume in full.

If the message “No IP address” appears on the screen when turning on the TV, try restarting the equipment by power. To do this, unplug the TV, then the set-top box, and then the router. After a couple of minutes, turn on the router to the network. Wait until all the lights on it turn green, then turn on the set-top box and the TV. Be sure to follow the power off sequence!

If, after switching on, you notice that some indicator is missing on the router, or it glows red / orange, call technical support.

Another common mistake is “No signal”. It occurs when you turn it on and most often denotes an incorrectly selected signal source. Another option is breaking the cord connection. Check the integrity of the cable, try reconnecting all the plugs connecting the set-top box, TV and router. The rarest reason for such an error is the failure of the set-top box. But only a master can diagnose it, so you can't do without a call to technical support.

If it's the company's equipment, they'll pick it up for repair. But, since digital television cannot work on a TV without a Rostelecom set-top box, you will be given a working STB for the duration of the repair. You already know how to connect it.

Digital TV without wires

Many subscribers are interested in how Rostelecom's digital television is connected via Wi-Fi. There is such an opportunity, but for its implementation you need a set-top box with a special port for a Wi-Fi adapter. In this case, it is better to entrust the router settings to specialists (please note that this service is most likely paid at Rostelecom). But most importantly, the quality of broadcasting with such a connection will be unsatisfactory.

Television involves the transmission of a very large data stream, which a wireless network may simply not cope with. And if you and the Internet are connected via Wi-Fi, get ready for the fact that the image on the TV will constantly slow down and crumble. If you do not want to pull wires around the apartment, the best option would be to purchase devices called "video sender" in the same Rostelecom. Belonging to the category of PowerLine adapters, they will allow you to establish a reliable wireless connection and transfer up to five video streams.

Already you will not surprise anyone with 2-3 TVs in the house - one is always present in the kitchen, where the whole family gathers, the other in the living room, and the third can be in the nursery and in the bedroom. But what if you bought one IPTV service package, but you want to connect a second or even a third TV to it?

Do you really need to purchase their own set-top box for each of them? Logically, this is how it should actually be, but there are other ways to view one packet on multiple receivers.

Note: both TVs will be able to show only one channel, that is, users will be able to watch the same program.

If you are satisfied with this state of affairs, and you agree that:

You will watch the same program on 2 TV sets.
Use just one remote control to switch to another viewing channel.
You will have to buy additional cables of great length, and if you are going to connect a second receiver via a high-frequency HDMI cable, you will have to pay a decent amount. Of course, the tulip connection is cheaper, but the playback quality will be much lower.

Through Rostelecom equipment

Pairing devices on a free connector. Take a close look at the rear panel of the set-top box, and if you find a free socket, the connection will go through it.
If the first receiver is connected with an HDMI cable, then the jack marked RCA (for tulip) can be used and vice versa.
We go to the store and buy a cable of the required length, and mount it for connection. Note! The port on the receiver for this type of cable must be free. If you have an old model of set-top box, then the HDMI jack may be missing, instead RF OUT will be displayed. Connect both devices through this port with tulips.

Via signal modulator and divider

This is a costly but reliable option:

You need to purchase a couple of special devices - this is a high-frequency modulator and a divider. The first is connected via the cinch of the RCA connector to the set-top box, and then the divider is connected via a high-frequency cable.
Then the outputs are connected to TV sets. But if you have purchased equipment with multiple RCA jacks, then you will no longer need to purchase a divider.

Via PLC adapter

A modern solution without problems is the purchase of branded PLC adapters (approximate cost is about 1 thousand rubles).

This connection is absolutely reliable, it is not only tamper-proof, but also transmits high-definition signals. Purchase a separate adapter for each TV receiver, and the problem will be solved, but in this case, you will also be able to watch different programs on each of the TVs. The provider allows the purchase of several models by installments at once, and this is important.