How to put a ringtone on an iPhone. How to put music on a call on an iPhone (iPhone)

If you want to immediately find out who is calling you on your iPhone - relatives, friends or strangers - assign a separate melody to each contact. But often there are difficulties with setting the songs you like to a call or message.

Let's consider how you can put a song on a call on an iPhone.

How to put any song as ringtone on iPhone?

To do this, you do not need to install a special application or buy ready-made ringtones from the iTunes store. If you want to create a call from a song you like or your own recording and assign them to your contacts, see how.

There is a very simple way to set any ringtone from iTunes library as a ringtone for iPhone.

Step 1. First, select a song for the call. Open iTunes on your computer and go to the Music tab. First you need to download the music track from your computer. To do this, open the File menu and select "Add File to Library".

Step 2. Now you need to select the fragment you like from the song. There is one limitation here - the maximum ringtone duration is 38 seconds. Right-click on the audio track, go to the Details tab, and then open Options, which contains the music trimming tool.

In the window that opens, mark and set the start and end times of the song fragment. Remember that its duration is limited and therefore you need to set an interval that does not exceed 38 seconds. You may have to listen to the melody several times before you can accurately set the beginning and end of the fragment. To save, confirm the changes made with OK.

Step 3. After that, go to this audio track again, right-click on it and select "Create version in AAC format". The original idiotrack and the short version of AAC will now be on the list of music in the Library. To distinguish AAC from the original, it is better to rename it.

Attention: You can trim a fragment only from purchased music files in the iTunes store or downloaded from a computer. Audio tracks downloaded from Apple Music are in m4p format and are protected from conversion!

We now have the original and a short copy of the AAC and can unmark the beginning and end of the original audio track.

In the latest editions of the program (for example, iTunes 12.5.X), the Create AAC version item will be available from the menu:

File -> Convert -> Create ACC version.

After trimming the melody and saving the section of the song, it will be saved on your computer in the Apple Music directory.

Step 4. Right click on the ACC version and open Show in Windows Explorer. Here you can change the extension from m4a to m4r.

After saving, move the file from the folder to the Desktop.

If the m4a file extension is not displayed (that is, you see only the file name), then a function is activated in Windows that hides extensions. In this case, it will not be possible to change the format.

To show extensions on Windows go to the following path:
Windows Explorer - File menu - Change settings and properties

Open the View tab, then in the Additional options section, find the Hide extensions for registered file types item and uncheck it. Confirm the changes with OK.

Step 5. In the iTunes program, go to Settings (three dots) - Sounds - Ringtones. Drag a ringtone from the Desktop to this section.

Step 6. Now you need to sync your iPhone with iTunes. In the device section, click on the iPhone icon and go to

Sounds → Sync Sounds → Selected Sounds →

and select the songs you want to sync with your iPhone.

Step 7. How to set any song as ringtone on iPhone

On iPhone, go to Settings → Sounds → Ringtone and select a new ringtone from the list (it should be at the very top of the list).

That's all. In this way, you can easily cut a song and put a fragment of it as a ringtone. Now you can repeat this process and add as many ringtones made from the songs you like as you like.

They often refuse the idea of ​​putting their own ringtone on the call, considering the procedure too troublesome and preferring the standard Marimba. However, as iPhones spread among domestic users, the use of built-in ringtones begins to cause inconvenience: when Marimba sounds in a public place, every second person reaches into his pocket for a gadget to check if they are calling him.

The increase in demand for original ringtones has given rise to new opportunities for their creation: now you can put a song on a call not only with the help of iTunes, but also through other software. It is important to remember two rules: the ringtone must have a special permission. .m4r and not exceed 40 seconds.

How to put music on a call via iTunes?

Make a ringtone through iTunes you can use the following algorithm:

Step 1. First of all run the program iTunes and call the side menu by pressing CTRL + S.

Step 2. Select the track you would like to make a ringtone from and right-click on it. We will make a ringtone from the band's song " Depeche Mode» « In your room". In the menu that appears, select the item " Intelligence».

Step 3. In the block " Intelligence"Move from the section" Details"(Which is selected by default) in the section" Options"- you will see a window like this:

Here you can adjust the volume of the ringtone (for example, double the original composition) and select an equalizer preset:

The presets are the same as those available in the settings of the standard application “ Music».

Step 4. Check the boxes next to “ Start" and " End»And set the interval so that the ringtone does not exceed 40 seconds.

Then press the button " OK»At the bottom of the window.

Step 5. Find the edited track in the list in your library and select it.

Although the music library states that the track is originally 4:51 minutes long, when played in iTunes you will know that the track has been cut to 30 seconds.

Step 6. Follow the path " File» — « Convert» — « Create AAC Version"Without deselecting the selected track:

Next to the original song in MP3 format, a "clone" will appear - a trimmed AAC track half a minute long.

After completing this operation, do not forget to return via " Options»The same duration as the original track.

Step 7. Right click on the AAC file and select " Show in Windows Explorer»:

A special folder will open iTunes, located on the C drive on the computer - it will contain the ringtone:

Step 8. Change the file format from m4a on m4r... This is the tricky part, because on many Windows 7 computers, file formats are hidden. To display the permissions, you will have to dig deeper into the computer settings - in the explorer, type “ Folders settings"And go to the found section. A window like this will appear:

Go to the " View"And uncheck the box next to the item" Hide extensions for registered file types"(Located almost at the very bottom). Click " Apply" and " OK". After that, next to the file name in the folder iTunes the format will be displayed - change a on r will not be difficult:

Step 9. The final chord remains: in the side menu of the media library iTunes Choose a section " Sounds»And enter the melody in m4r format in the appeared field:

Step 10. Connect iPhone to PC via USB cable and start sync. An important point: after connecting the gadget to the computer, click on the device icon in the top panel iTunes and in the left pane select the section " Sounds»:

Check the box next to " Synchronize sounds"And press the button" Apply" at the bottom. If this operation is not performed, synchronization will be ineffective, no matter how much you do it.

Further, it is a matter of technology to set the music on the call: on the iPhone we go along the path “ Settings» « Sounds» « Ringtone»And select a new ringtone (it will be the first in the queue). A new call can be set not only for a general call, but also for a specific subscriber - for this you need to find a suitable contact, click " Change"And select the item" Ringtone».

How to put ringtone on iPhone via iTools?

iTools- an alternative software solution from Chinese manufacturers that allows Apple users to do without synchronization when downloading music and iTunes generally. Create and put a ringtone through iTools incomparably easier than through iTunes, however, this method has its drawbacks.

When creating a ringtone for iPhone via iTools follow the instructions:

Step 1. Open up iTools and move to the section " Music»:

Step 2. Through the button " Add»Add the song to the list:

Step 3. Highlight a song in the list and click the " Make ringtones"Located in the top panel. A window like this will appear:

On the right you will see the duration of the unprocessed track - the composition from the example is 5 minutes 23 seconds. Set the parameters " Start" and " End»So that the duration does not exceed 40 seconds.

Step 4. Click the " Save to local", And the program will offer to save the ringtone to the computer memory immediately in the format m4r:

Step 5. Find the created ringtone on your computer and add it to the list with a simple drag and drop:

Step 6. Connect the gadget to your computer and click the " Import To Device»In the upper panel of the program. This will save the ringtone to the device memory.

In terms of making ringtones iTools has a number of advantages over iTunes: firstly, the user of Chinese software does not need to fool himself with extensions, and secondly, he does not need to synchronize. However, the program iTools There are also disadvantages: it is not Russified and does not give the user the ability to edit the metadata of the compositions.

You can make a call to an iPhone without using a PC at all - there are several special applications for creating ringtones in the AppStore at once, such as Ringtone and iTrax... You can read about the pros and cons of these and other programs for trimming music.

Instructions

To set music for calls on iPhone, you need to upload an mp3 file to iTunes. In the upper left corner, click on the note icon. The "Music" section will open in the application. If you have not previously uploaded mp3 files to iTunes, then this section will be empty. Click the "File" key in the upper left corner. From the menu that opens, select "Add File to Library".

In the window that opens, select all the tunes you want to download. You can upload both individual files and entire albums. Click the "Open" button. After that, the media library will be formed. If you did not see the files that you added, then just click on the existing album and the songs will appear at the bottom of the window.

The iPhone accepts only melodies no longer than 40 seconds for a call. Therefore, the next step will be to shorten the mp3 file. This can be done using various applications. Including the reduction of the melody can be done in iTunes. Right-click on the music you want to shorten to 40 seconds. Select the "Details" tab. She will be the fourth on the list. In the window that opens, go to the "Parameters" tab. Here it is possible to specify exactly the fragment of the recording that is necessary for playback. Check the box next to the word "Stop" and in the window on the right, enter the number of required seconds. After that press the "OK" button. Visually, this file has not changed in any way. Now you need to change the current audio recording format.

For iTunes version 12.4.0, you can change the audio recording format using the menu. To do this, just click on the audio recording, shortened to 40 seconds, with the right button and select from the drop-down menu the item to create the aac version.

For iTunes versions 12.5.1 and higher, the required item in the audio file menu section has been removed. Now, to convert a file to aac format, you need to go to the "File" section in the upper left corner of the application. Next, you need to point to the "Create a new version" item and select the third item in the submenu that opens.

Immediately after clicking the "Create aac version" button, file conversion will begin. As a result, you will get a file with the same name and artist, but with a completely different duration. If all points of the instructions were followed correctly, then the duration of the melody will not exceed 40 seconds.

Now you need to change the extension of the musical composition. To do this, right-click on the required file and select "Show in windows explorer" from the drop-down menu. Initially, audio recording is in .m4a format. In order to put this melody on a call, you will need to receive the .m4r format. That is, you just need to change the letter "a" to the letter "r". If you cannot see the extension of the audio file in iTunes, you need to do the following in the explorer: select the "Service" tab. After that, select the item "Folder Options" and go to the "View" section. Uncheck the box next to the item on hiding the extension for registered file types. Then press ok. Now you can change the format of the ringtone.

Do not cover the conductor. To make it easier to find the file you need for the melody, copy it and save it where you can easily later. Return to the iTunes app and click on the ellipsis in the top bar. In the list that appears, select the "Sounds" item. Now you need to transfer the previously prepared ringtone file to the iTunes window. If you didn’t save it in your folder, then by default the processed file was saved in the iTunes folder located in the “My Music” folder on the C drive.

The next step is to sync your phone with iTunes. To do this, you need to connect the iPhone with a usb wire to the computer where the application is installed. In iTunes, you need to find the phone icon in the top bar and click on it. In the sidebar of the application, go to the "Sounds" tab. A window will open to the right where you will need to synchronize sounds by clicking on the window next to the record of the same name. After making changes, you must click "Apply". If you forget to do this and close the window, then the changes will not be made. If all the actions were performed correctly, now you can easily put the converted melody on a call to the iPhone.

In order for the previously changed melody to be put on the call, you must install it. To do this, select the "settings" or "Settings" item. In the window that opens, select the "Sounds" item and in the next window select the "Ringtone" item. By default, all iPhones have a melody called a marimba. Instead, select the ringtone file that has been converted to iTunes and transferred.

Apparently, the developers at Apple are not very familiar with such a concept as a user-friendly interface. A lot of clever settings, "troubles" with security and copyrights - all this leads to the fact that users are forced to learn different approaches to work with the device and perform a bunch of unnecessary actions.

However, if someone has already figured it out and offers clear instructions, everything becomes easier. Oh yeah, here it is - a cool iPhone guide. It is easy to install music on a call through a computer with it, "like two and two". After all, it turns out that all you need to do is change the format of the composition and add it to the desired folder, or use the application. Let's consider both options. So, let's begin. So, let's begin.

Step 1

First, we need to see what formats we will deal with, and therefore we go to the "Control Panel" from the computer, find there "Folder Options" and "Folder Properties", select "View" and uncheck the box next to the item "Hide extensions for of registered file types ".

Step 2

Step 1

We select a song from our playlist, after which we set the ringing range - from what minute and second the melody will start and at what point it will end. At the same time, we are allowed to make a smooth start and fade at the end, and this, you see, is very cool.

Step 2

Save the selected fragment to the iTunes library. True, here you have to connect the iPhone to the computer - we find in the RingtonesMaker applications and the file we created, and then we synchronize “Sounds”.

The set of ringtones included with iOS, Apple's mobile operating system, remains largely unchanged. By purchasing a new iPhone model, the user receives a familiar notification pattern. Some have been using standard sounds for years without any discomfort. At the same time, many users are interested in the question of how to set a ringtone for a call on an iPhone 7, 8 or X. In this article, we will give several ways to change the sound of an incoming call or message and make your phone more individual.

The most affordable option allows you to do without a computer and any third-party applications. Apple has provided an opportunity for users to buy ready-made ringtones from a large and regularly updated collection.

  1. Open the iTunes Store highlighted in the screenshot.
  1. At the bottom of the screen, switch to the "Sounds" section. Above is a menu marked with a "2", which simplifies the search process. By default, ready-made selections are opened, in which ringtones are collected in groups.
  1. Switching the view to "Top charts" we get the sorting of sounds by popularity, calculated based on the number of downloads made by users. Choose the melody you like.
  1. By opening the internal menu and clicking on the name of the song, you can estimate how the ringtone will sound on your iPhone 7 or 7 Plus. The compilers of the catalog are also people and the fragment they choose does not always coincide with the one that you like. As in any store in the iTunes Store, no one forces you to buy a product that is bad or unsuitable in terms of sound parameters. Only when the selected call meets all the requirements, we proceed to its purchase by clicking on the button with the indicated price.
  1. Before downloading the ringtone, the system will offer to set its purpose in a pop-up window. If you use the button marked in the screenshot, the sound will simply be downloaded to the device. You can manually set it as a default ringtone or to indicate a call from a specific contact.
  1. The last step involves paying for the purchase using the Touch ID fingerprint sensor. If for some reason it is not configured, you will have to do it the old fashioned way by entering the password for your Apple account.

Trim Song in iTunes

The free option of installing a call involves making it yourself in iTunes. Here, the user's imagination is limited to only one factor. The total duration of the fragment selected for making the ringtone should not exceed 30 seconds. In this case, you can use almost any track in mp3 format that is available in your music collection.

  1. Open the selected composition with iTunes. We call the context menu by clicking on the ellipsis, which appears at the place of the duration of the composition when you hover over it with the mouse pointers. We select the item "Information", indicated in the screenshot by the number "2".
  1. In the additional window that opens, go to the "Parameters" tab. Select the desired fragment from which we will create a call and set its boundaries using the checkboxes indicated by the arrow. You can determine the beginning and end of a track with an accuracy of hundredths of a second. After completing all operations, it is imperative to return to this point in order to remove the set boundaries. Otherwise, the musical composition will not be played in full, but with a time-stamped passage.
  1. In the top control menu, select the "File" item. We go down it to the "Conversion" section. Expanding the nested menu, select the creation of a version in the AAC format. The need to perform this operation is due to the fact that Apple uses the MP codec in its devices
  1. Returning in the main window of the program to the composition selected for work below the original, we will find a second file with a given duration. As described above, we call the context menu for the created track segment. We pass in it to the point marked with a frame. In Windows it is called "Show in Explorer".
  1. A folder with two files will open in the system file manager window. The original composition in mp3 format and the fragment we created with the m4a extension. We select the latter and with the right mouse button we call for it the standard context menu for controlling the parameters.
  1. From the general list, select the item "Rename".
  1. We change the extension m4a to the one that is standardly used in the "apple" technique for m4r ringtones, rewriting the last letter in it. The system will ask you to perform the specified operation. We confirm it by pressing the button indicated in the screenshot.
  1. Switch iTunes to manage mobile devices using the icon marked with an arrow. In the drop-down list, select your iPhone 7 or 7 Plus.
  1. In the navigation area, open the "Overview" item. We put a tick in the place indicated by the arrow. When Apple Music is enabled, this parameter has the value shown in the screenshot. If the branded streaming service on the smartphone is not activated, it is called "Manually process music and video". Finish the configuration by clicking the "Apply" button.
  1. We return to the navigation area and switch to the "Sounds" section. From the file manager window, drag into the area marked with the number "2" the segment of the song with the m4r extension, which we want to use as a ringtone. The cable connection is optional during the described operations. When syncing with a computer via Wi-Fi is configured, the smartphone simply has to be in the availability zone. To download the ringtone to the device, press the button indicated by the number "3".

Configuring sound options

Having completed the installation of melodies in any of the described ways, we will consider several useful options that will come in handy when working with sound events.

Default setting

  1. To change the parameters of sound signals, open the smartphone settings and go to the section marked in the screenshot.
  1. Inside we see a group "Sounds and vibration patterns" in which all types of notifications are configured. The screenshot shows the most commonly used ringtone control unit.
  1. The list of available tunes begins with those purchased or installed by the user himself through iTunes. The default sound for incoming calls is indicated by a blue check mark in front of the track name. To change the ringtone, just tap on the one that we are going to use in the future. The smartphone will play the selected melody giving an opportunity to evaluate the sound volume. The number "2" in the screenshot shows an area that allows you to do without synchronization with a PC when switching to a new device. By clicking on the interactive link, we automatically download all ringtones previously purchased from the iTunes Store to your iPhone. Of course, this method will only work if they were purchased under the same Apple ID account.

The described principle is suitable for changing the melody of incoming SMS, notifications of new mail and others contained in the general list. The only limitation in this case is again the length of the piece of music. If a ringtone for a call can have a duration of 30 seconds, then for other notifications it should be 29 seconds or less. Otherwise, the melody will not be displayed in the list of available for use in this type of notification.

Ringtone for contact

All incoming calls from recorded or unknown subscribers are identified by the default ringtone selected in the previous paragraph. An individual ringtone is assigned directly in the smartphone's address book.

  1. Open the contact card for which we want to set a unique call identifier. In the upper right corner of the screen, click on the "Change" button indicated in the screenshot by the arrow.
    1. Opening it, we see the default melody. The rest of the sounds available for use on a smartphone are grouped below. The selected one for this contact will be indicated by a blue check mark.

    Finally

    Using the instructions given in this material, you can independently set and configure the settings for using ringtones. If desired, the notification scheme can be completely changed by choosing comfortable sounds and giving the smartphone an additional element of individuality.

    Video instruction

    The video posted below will allow you to get acquainted in more detail with the procedure for performing the actions described above and can serve as a visual aid when they are performed for the first time.

Recommended to read