iPhone 5 flash requires cooling. "iPhone requires cooling before flash can be used." How to fix the problem

One day you may find that the main camera iPhone Apple 5S doesn't work. It happens that along with this, the flash, flashlight and front camera also do not work. The reasons why the camera does not work on the iPhone 5S are quite different. In this article, we will look at different cases and, most importantly, fix the camera ourselves.

In the iPhone 5S device, the front camera, flash, flashlight and front camera are interconnected. When the iPhone camera is not working, when you press it, a black screen appears and shows the entry: "iPhone needs cooling before using the flash." This is evidence that the flash on the iPhone 5 does not work.

To get started, try starting the hard reset mode by simultaneously holding down the two buttons - Power and Home for 10 seconds until the apple logo appears, turn on the device in a minute.

If this does not help, try updating the content by resetting all settings on your iPhone to factory settings. But before that, do not forget to copy all the data from the iPhone through the iTunes program, if the data is more than 5 GB, to another device. Or upload files to the cloud through the iCloud program if the storage of the copied data is over 5 GB. After resetting the iPhone, try starting the camera, if it doesn’t work, then the problem is probably something else.

For some, updating iOS to version 10 helps to reset the error in the system due to old software. But it doesn't always help if it's not system error, but still a technical breakdown on the iPhone 5 or iPhone 6.

Troubleshoot iPhone 5S camera failure

As a rule, the cause of a non-working flash can be an iPhone falling, moisture getting into it, a board or microcircuit failure, or the flash itself being unusable. You need to know how to clean the camera on the iPhone 5. In any case, in order to get exactly your reason for a non-working iPhone camera, you still have to disassemble the device.

To do this, we will arm ourselves with tools: a plastic pick or spatula, a special set of screwdrivers, tweezers, a suction cup with a ring for opening the display, a rubber mat and containers for bolts, so as not to confuse which one when reassembling.

After all the tools are ready, turn off the iPhone 5S by first sticking out the SIM card, holding down the Power button and the Home button at the same time for 10-20 seconds until the Apple logo appears, as well as the shutdown sound.

Using a special Phillips screwdriver, unscrew the two bolts on the bottom end panel of the iPhone, near the connector. Then we attach a suction cup with a ring to the screen glass in the middle below, above the Home button, and, holding the smartphone by the case with one hand, gently and smoothly pull the suction cup ring with the other hand to separate the screen from the rest of the iPhone. If the screen does not immediately give in, carefully, without damaging the case, insert the sharp end of the pick into the lower slot to run it along the perimeter of the display in order to help unfasten the latches, now gently pull the ring again.

Do not forget that the iPhone 5S screen is fastened with a fingerprint sensor cable from the opening side, near the touchscreen. Therefore, do not lift the screen at a right angle without first unfastening the cable with tweezers or a plastic spatula.

After the lower cable is disconnected, it is necessary to unfasten the upper cables that attach the sensor and cameras. Sometimes at such a moment you can visually determine that the camera cable was already disconnected, apparently when the iPhone fell, the latch shifted and the cable came off, therefore, most likely, the camera does not work either. Then you need not to disassemble the iPhone further, but, on the contrary, carefully connect all the cables in the reverse order and, without tightening the bolts, turn on the iPhone. On the touch screen, try turning on the non-working flash, if it functions (turns on and off, the flashlight works), then the breakdown has been fixed at this stage. It remains to assemble the iPhone by tightening the bolts.

Chip repair

But the problem is not always so easily fixed. If you connected all the cables, but the camera did not work, then the breakdown is more serious and we disassemble the iPhone further. Having unfastened all the cables, he unscrews the bolts on the side panels of the smartphone, on which the iPhone display is attached to the case.

We remove the protective film around the flash and disconnect the camera cable itself, and then take it out. If, upon visual inspection, it is determined that the camera is working, we reconnect it, it is possible that the problem is in the contacts or the microcircuit. Usually, if the iPhone has been disassembled more than once, then the protective film has been removed and now, with a slight shake, the camera cable easily snaps off and flies out. Therefore, it is important to keep the protective film on the camera.

The next step is to unscrew the bolts holding the battery. And then remove the bolts from the microcircuit boards. We take out the tray from under the SIM card. We take out the microcircuit and unfasten the antenna. We install the microcircuit itself on a special holder-clip and use a special device for cleaning boards to warm up the microcircuit in the camera area, having previously installed a pair of heat sinks for heat removal.

After that, using a special cloth and tweezers, clean the connections on the microcircuit, gently wipe the glass plates and let the board cool. Next, we connect the board to the place in the iPhone, snapping all the cables in reverse order and screwing all the bolts into place with a Phillips screwdriver. Next, launch the camera by turning on the iPhone. If the camera, when touched on its icon, turns on, then the problem is fixed.

If the camera does not turn on again, then the circuit is interrupted somewhere and therefore the power (charge) is not supplied to the board. With the help of the device, we will establish where the power supply is weak on the microcircuit or is completely absent. For example, when ringing the circuit, a non-working capacitor or track can be detected. Then it is necessary to establish contact by replacing the capacitor with a working one and soldering the connection.

After performing these manipulations, do not forget to ring the microcircuit for the absence of a short circuit. If everything is in order, you can install the chip in place by connecting all the cables in the right order, installing the film in place and securing the bolts. After that, turn on the iPhone, and also launch the camera in order to check its working condition. As a rule, after this procedure, the cameras resume their work - front and rear.

Hello everyone! I have encountered the error, the text of which is indicated in the title of the article, more than once - either acquaintances or blog readers periodically ask about its causes and methods of correction in the comments. To be honest, I wanted to write about this for a long time, but somehow my hands never reached it. However, recently my iPhone 5S also demanded that I cool down before using it - which means that it is no longer possible to pull and it's time to “give birth” with instructions on why such things can happen and what to do with all this !? Let's go!

So, the full text of the error is: “Temperature. iPhone requires cooling before use." Short and to the point warning. By the way, sometimes a specific action can be indicated here, which is not available due to high temperature - for example, turning on the camera flash.

It all looks something like this:

How to fix? Let your phone cool down! I agree that this is just amazing logic on my part. But jokes aside, this is really the first and most important action to take. What should be done?

Disconnect iPhone from charger, computer, speakers, headphones, amplifiers, adapters, etc.
Turn it off for a few minutes - the case should cool down.
If the high temperature warning sign is stuck and the iPhone cannot be turned off using the Power button, then we first do a hard reset (), and then turn it off for a while.

All this should work - in the disconnected state, the iPhone will cool down and it will be possible to use it again. Well, now, after solving the problem, it's time to think - why did the phone even begin to signal us about a high temperature?

Here are some of the reasons:

As you can see, there are many options and, unfortunately, not all of them are very pleasant.

So, to summarize or conclusions from this entire article:

If the error “cooling is required before using the iPhone” appeared only once or twice, and after the reboot everything went away, then you should not be upset - in some cases this is normal and you do not need to worry.
If the warning about high heat pops up constantly and it is impossible to use the iPhone, then most likely, unfortunately, you will have to walk to the service center.

P.S. We check the secret way to reduce the temperature of the iPhone - put "likes" and click on the buttons of social networks! :)

P.S.S. Clicked? Wonderful! Now it’s worth checking out in the comments - this is where you can tell your story or ask a question. I'll try to help everyone!

If the camera on the iPhone does not work, then the possibilities of full use of the device are limited. The causes of the malfunction may be different, but there are effective ways to restore the smartphone to working capacity on your own.

Causes of malfunctions

During the active use of the iPhone, unforeseen circumstances may occur, as a result of which the front or rear cameras fail. The camera does not work as a result of the following factors:

the presence of viruses in the device

liquid getting into smartphone

It happens that the front camera works, and when you switch to the main one, a dark screen appears. This may indicate a malfunction of some parts in the phone, but sometimes software glitches are the source of the problem.

Signs of failure of smartphone functions

If, when you turn on the camera, the screen says “the flash is off, the device requires cooling to operate,” although there was no overheating, this is a clear sign of a breakdown. In addition, there are a number of factors that indicate the inoperability of the camera. Here are some of them:

camera takes a long time to turn on
see black screen
Photos are blurry, colors are not correct
flashlight does not turn on
Camera freezes when turned on
no flash
application disappeared

To find out the reason why blurry photos are obtained, the image is poorly focused, the camera has completely stopped working, you can perform several actions yourself or use the services of professionals.

How to independently restore the full operation of the smartphone?

If your phone is under warranty, it is best to contact a service center to restore functions.

To independently start the camera, which is frozen after the update, does not turn on after the fall, reports that cooling is required, you can perform some effective tricks.

Close the app via the multitasking screen and launch it again from the home page. If this does not help, then try turning on (off) the power saving mode in your mobile device and switching cameras from front to external until the dark screen disappears. You can also:

reboot the device (simultaneously hold the "Home" and "Sleep" buttons until the "apple" logo appears)
perform a hard reset
install the latest firmware via DFU mode

If these actions did not solve the problem, then the cause of the malfunction is mechanical damage to the parts. Perhaps the cable or battery has gone. In this case, the smartphone needs repair.

If you have knowledge and experience in restoring the functionality of cameras, you can disassemble and repair the device yourself. Otherwise, you will only aggravate the breakdown and increase the cost of repairs.

To disassemble the iPhone case yourself, you need a set of special tools (miniature screwdrivers, auxiliary tweezers, a plastic spatula, a suction cup, etc.). Disassembling a smartphone is carried out in several stages:

remove back cover
the screen is lifted and unscrewed from the motherboard
the battery is disconnected
the board is dismantled, the fasteners to the case are unscrewed
check the attachment points of the cable with the camera

If the phone is dropped, the cable connecting the camera to the system board may come off, as a result of which you can see on iPhone black screen.

After disassembling the phone, reconnect the camera module, check the connections. Then assemble the smartphone and test the work mobile device. If the camera turns on, takes pictures and the pictures are normal, then the problem is fixed.

When all fasteners are in place, but the screen displays a closed lens or a dark background, diagnostics of the Apple device are necessary. A qualified technician will be able to determine the exact cause of the malfunction.

Benefits of professional help from specialists

In service centers, masters repair Apple devices of all models. The duration, price and quality of the repair depends on which specialist you turn to for help. If the camera does not work on the iPhone, qualified specialists perform the following actions:

smartphone diagnostics
assessment of the performance of all functions, if necessary, their adjustment
replacement of damaged parts (glass, flashes, cables, etc.) with original ones
cleaning the smartphone case from dust, lens glass from stains and streaks
checking the functionality of the camera after repair

To identify the cause of the malfunction, the masters use professional equipment and special tools. They know how to efficiently replace the necessary parts.

Do you want to learn how to consistently earn on the Internet from 500 rubles a day?
Download my free book
=>>

All owners of devices love to shoot what is happening on the built-in camera, and this is actually great. The world is changing very quickly and everyone wants to have memorable videos or photos.

Previously, there were few photos, and even fewer videos. They photographed what was happening on film with various cameras, creating a personal story.

With the advent of such a device as, everything has changed dramatically. This device (iPhone) currently confidently occupies a leading position among smartphones in this class.

The iPhone is a powerful mini computer. With it, high-resolution photos, good quality videos are taken. On this device, you can not only take beautiful pictures, but also store them on your device. You can send footage to your friends via the World Wide Web.

So the iPhone is a complete device for modern life. This is a phone, equipment for photography, video shooting, a mini-computer, three in one, so to speak.

But there is one small catch. The software of this cute thing needs to be updated from time to time. It is not clear for what reasons, after updating the software, the camera on the iPhone 5s does not work black screen, flash, flashlight.

When you try to turn on the camera, the screen turns black.

iPhone camera and its malfunctions

This article will discuss the iPhone 5s camera. There are moments when you want to capture an interesting moment, but instead of the usual camera window, you see a black screen.

Possible causes of the malfunction:

moisture getting into the device;
impact damage;
settings failure when updating the device;
product defect.

How to determine the cause in your case will be discussed in this article. As you can see, there are several reasons for this trouble. You read about the first reason a little earlier. This trouble appears after updating the software version.

A possible cause could be damage from impact if you accidentally dropped your device. When hitting a hard surface, the cable from the camera or the battery is simply displaced.

The next reason could be moisture getting into the device. This happens even from falling onto wet grass, and if the fall was into water, then the moisture that got inside the device is to blame.

There are many reasons, as a rule, they all come from shocks, moisture and jambs of the program on the device. Now you know about the most common reasons why a black screen appears when you turn on the device's video camera.

Debugg

Now is the time to talk about fixing this nuisance. You need to remember when a black screen began to appear when you turned on the camera on your smartphone.

If this began to happen after software updates, then the updated device software is “buggy”.

You can fix such a glitch by simply rebooting the device, or turning on the rear view camera several times, then the front one, such a step is enough.

But, if this action did not bring success, then you need to go through all the troubleshooting steps described in the iPhone support tips.

Such steps may turn out to be useless, then you need to look inside, but if your device has not yet expired, then you do not need to look inside the iPhone yourself. Take your device to the salon where you purchased it, let them solve this issue.

Camera not working on iphone 5s black screen as a result of a fall

If your device began to show a black screen when you turn on the camera after you dropped it, then this problem occurred after the received shock.

As a rule, upon impact, the camera cable or battery is displaced. In this case, you need to remove the iPhone cover and switch the camera cable or fix the battery.

Sometimes iPhones are not repaired in official salons. After such a repair, there is no special fixing film on the replaced cable. Therefore, at the slightest shake, the cable jumps out of the socket.

Tip one, repair the device in official stores, otherwise you will always need to remove the cover of the device and fix the cable yourself.

Moisture ingress into the device

In this case, you will have to change the camera module, which, unfortunately, cannot be disassembled. When the iPhone falls on a wet surface, moisture enters the camera module through the microphone hole.

This design feature appeared in the design of the iPhone 5s. For this reason, water flows into the module, after which the camera fails.

If you are afraid to replace the module yourself, take your device to a service center. There the master will change the module and the device will become operational again. Although there is a step by step manual for replacing the camera module, it can be found on the World Wide Web.

So treat your device with care, otherwise, at the right time, the iPhone will fail, and you will miss a beautiful episode that will never happen again.

What to do if iPhone won't turn on

There may be several reasons for this - a software or hardware failure - a malfunction of the bootloader or iOS, damage to the device, hypothermia of the smartphone and loss of battery charge, malfunction of the battery or charging connector, charger. There can be many reasons why the iPhone does not turn on.

What to do if you forgot your passcode on iPhone

Solutions to this problem depend on which of the passwords you forgot. The device has iPhone restrictions passwords, a lock screen password, and a privacy password. account Apple ID. The settings password can be reset without losing information. Consider Reset forgotten password lock screen. First of all, you can try to guess the password, despite the limited number of attempts. If you couldn’t remember, then you have to use iTunes and the Internet. If the Internet is fast, then you can download the firmware and restore the iPhone by resetting the lock password. Without the Internet, you can use the firmware downloaded in advance. After resetting the password from the iPhone and restoring the firmware, all information will disappear from the phone.

What to do if iPhone won't charge

First of all, you should try to charge your iPhone using a known-good charger. If that doesn't work, connect your iPhone to your computer via a cable. If the computer does not see the iPhone and the smartphone does not charge, most likely the phone's power connector is broken or there is a malfunction in the power controller.

iPhone is disabled - what to do?

A similar problem is usually observed in those who found an iPhone, when the real owner remotely locks the device. The message that the iPhone is turned off may contain several message options:

Try again in N minutes - if you enter the lock screen password incorrectly several times.
iPhone is disabled, connect to iTunes - this message is possible on some firmware versions.

iPhone needs cooling before using

A similar message is received by users when their iPhone is overheated in the sun, in the interior of a closed car, near open sources of fire or high temperatures. The developers from Apple have provided one of the possible options for using the phone when the iPhone is in unsuitable conditions. Electronics reads the temperature of the battery and microcircuits, blocks the active use of the device to avoid damage to the electronic components of the device. If a message about the need to cool the iPhone appears, it is enough to cool the device, after which the message about the problem will disappear.

How are you? -