Home media server for windows 7 setup. How to set up upnp dlna home media server for LG TV. Ways to create a server

All devices that have a DLNA module have been tested in advance and have a corresponding sticker on the case.

It is also necessary to have a description of the type of content supported, there is a DLNA server, a printer or a player, that is, the module allows you to transfer a certain type of content - images, signals, sound.

All these devices can freely connect to each other, depending on the purpose, the technique has its own class. The classes can be distinguished as follows:

1. Digital media servers. This category includes storage devices, for example, Cell phones.
2. Digital media players. This includes devices that can receive and play digital content. For example, a TV that can play music and sound from another device.

How to create a home network

The home network layout for DLNA is similar to the internet data transfer scheme.

It is he who provides the connection of devices to each other. To set up a home network, you will need the following:

1. TV to play.
2. Media server for data storage, phone or laptop.
3. Router - used to ensure the connection of receiving and transmitting devices.
4. Cables or wireless adapters required for DLNA connections to the network.
5. Powerline adapters - allow you to distribute the Internet over the mains.

The first thing to do is to connect the playback media device to the router.

There are several ways to do this - connecting via the mains, via a cable, or via a wireless bridge.

• Connecting a media device to the mains - great way set up a network throughout the house. For this, ordinary electricity is used, cables are not needed. Only an adapter for a Powerline socket can be useful for setup.
  All that is required is to simply connect the TV to the network through the adapter and the DLNA home network will start functioning.
• If the router and TV are located nearby, it is best to use a cable connection. The Ethernet cable is connected to the port of the TV and the router.
• Creating a media group using a wireless bridge is appropriate when the TV is located far from the router. The bridge can be connected to the TV via a cable, and to the router via wireless network.

Advice: optimal solution for any case there will be an electrical connection.

The next configuration step is connecting other DLNA devices to the router.

After connecting to the TV, you can connect any DLNA server to the network - laptop, phone, tablet.

But if this is not possible, you can connect them in the ways indicated above.

Thus, the TV will be able to "see" the devices and play content.

Setting up DLNA homegroup devices

In order for the TV to recognize the content, you need to set up media group devices. For a laptop and tablet, you will need to install a special software.

These may include the following programs:

• Windows Media Player 11 or 12.
• VAIO Media Server (for Sony TV).
• AllShare for Samsung.
• LG Smart Share.
• home media server.

It is necessary to allow group access to the laptop, this can be done in the software settings by activating media sharing.

These can be music files, images or videos. Typically, a library or list is created that can later be played by a media device.

Not every smartphone can be connected to a DLNA group. But those that have this feature connect via Wi-F to a wireless router.

Home media server (UPnP)- a universal program that provides access to content hard drive your computer electronic devices, such as TVs, players, game consoles. Data is transmitted using the UPnP (DLNA) protocol. This program works with TVs, game consoles, stereos, mobile phones and smartphones.

Today, human life in modern realities is very difficult to imagine without high technology. Each of us is surrounded by laptops, computers, TVs, stereos. It often happens when you really want to watch your favorite movie on a big TV or play a computer game through a set-top box. A multifunctional software package home media server for Windows is designed to solve such problems. With it, you can organize full access to all media content on your computer's hard drive.

Download Home Media Server for free

The Home Media Server program is small in size. You can set up a home media server in just a few minutes. Its main features include transcoding video and audio into a form that supports a TV or tape recorder. You can also set up subtitles, choose the right image size for any screen, and choose audio tracks on your own. The user has the ability to send Internet radio or TV directly to the TV or player.

If you can't see your life without digital television, you can also download a home media server. It supports all modern digital formats (C, S, T), works great with the VLC Media Player program and can transmit a digital signal to other electronic devices using the Digital Media Renderer function.

The home media server in Russian has wide functionality. It is possible to save transcoding profiles. Their use greatly simplifies the setup when connecting new devices. Downloading a free home media server (DLNA) is recommended for owners of Philips, Sony, Panasonic, JVC, Toshiba, Samsung TVs and players. Each of them has all the necessary connectors for interaction via the UPnP protocol with personal computer. Thus, with the help of this program, you can significantly expand the capabilities of these TVs.

All novice users are advised to look at the official website of this application. There is a wonderful forum where solutions to the most common problems are described in detail. You can also learn how to effectively connect a particular device.

You can download a home media server without registration and SMS on the SoftAtaka website. We always provide the latest and most relevant updates.

The Home Media Server program is used as a DLNA server to view content and listen to music from a computer and laptop on a TV. Home Media Server is optimally suited for these purposes and has various useful settings.

What is DLNA?

In English translation Digital Living Network Alliance (DLNA) - certain standards, thanks to which compatible devices can transmit and receive various media content over a home network and display it in real time using wired and wireless channels.

Thanks to this technology, home computers, mobile phones, consumer electronics, laptops are combined into a single digital network. When using devices that support DLNA certification, they are automatically configured and networked with users.

Thanks to the transmitting device (server), information is transmitted to the TV. A PC, phone, camera, camera can act as a server. The presence of DLNA support may mean that the device can receive video.

Such a wired or wireless network has its own advantages:

• The ability to instantly access materials located on all user's home devices. Watching a movie or photo is possible immediately after downloading, you can listen to music on the music center in the highest quality.
• For a wireless connection, there is no need to drill holes in walls and doors.
• With a wireless connection via Wi-Fi, it is possible to download entire files to the desired devices for further viewing.

The disadvantages of DLNA include:

• To make a wired connection (for example, through reinforced concrete walls that block the radio signal), it is necessary to drill holes in the walls and doors, which will negatively affect the interior.
• The wireless connection is significantly affected by various obstacles in the form of steel reinforcement or thick concrete (brick) walls.
• As with the Internet, there is a chance that a streaming file will be delayed if it is too large or if the connection speed is not fast enough.
• Using a weak router can affect the speed and quality of data transfer.
• Not all file types can be played, and HD video transmission may be of poorer quality.

Installing the Home Media Server (HMS)

HMS installation is carried out in the following sequence:

After the installation is completed, it is better to delete the unpacking files in manual mode because they automatic removal not provided.

General configuration of HMS as a DLNA server

Installed DLNA server at startup, it will prompt the user to continue the configuration process:

1. At the first start, a window with the initial settings will appear. It will prompt you to select a device for broadcasting media content. The proposed list will include many templates with devices. If your own or similar device was not found, then you should stop at the standard DLNA Device. Having made a choice, you need to proceed to the next step.
   
   
2. Select folders from which to take media content. The choice of folders with media content can be done at this stage or added later. After selecting the folders, you need to click on the "Finish" button.
   
   
3. After the initial settings have been made, you will be prompted to create backup with settings, image cache and database. You will also be prompted to set up an automatic backup schedule. Then the "Close" button is pressed.
   
   
4. The main window of the program will appear. Here it is worth paying attention to certain important settings. On the left side, the types of settings will be listed, and on the right side, there are sections with specific settings.
5. On the left side, you need to go to additional settings and set up automatic loading of the DLNA server with the computer turned on. To this end, you need to select the second and third points.
   
   
6. Next, you need to go to the "Server" tab and specify your DLNA server as it will be on the network.
   
   
7. After changing the name, you need to return to adding folders (if this has not been done before or when adding other folders). To do this, click on the "Add" button, then select the folder you are going to add. Next, you need to perform its “Scan” to get files from folders to the server.
   
   
8. If the actions are performed correctly, a list of these files will be on the right side of the screen. If this list contains the necessary files, all that remains is to launch and start using the program. To do this, press the "Start" key.
   
   
9. In the case of the enabled “Windows Firewall”, the system will be prompted to allow access to the network. You should select which networks access will be allowed to, and click on the "Allow access" button.
   
   

Connecting and viewing media content

After starting the program, turn on the TV. When properly connected, it will be in the "Home Media Server".

On the example of an LG TV

For example, a variant of the operation of the LG LN655V TV receiver with a DLNA server is presented. In the main Smart TV menu, go to LG SmartShare.

First connection:

1. When you connect the unit to a TV for the first time, please refer to the "Connection Guide" located in the lower right corner.
   
   
2. Next, you need to go to the "PC Connection" tab and click "Next".
   
   
3. Next, there will be two more windows, where you also need to select "Next". If nothing is automatically set in the IP address selection window, then select your home network (wired or wireless, according to how the TV is connected).
   
   
4. On the fourth press, the owner's computer should be visible. If it does not exist, you must restart the server.
   
   

After the initial connection, the device will be displayed at the end of LG SmartShare "Connected Devices". If it is not there, you need to restart the server on the computer. For example, for movies, the folder with "Movies" is selected, and then "Catalogs of media resources".

A list of folders that have been added to the HMS settings will appear. You can use any folder to start the movie.

Using the SONY Bravia TV as an example

In this case, a KDL-46XBR9 TV receiver was used. Action algorithm:

1. The Home Media Server program is installed and launched on the computer. To go to the settings, use the corresponding key.
2. On the right side you can see the "Add" button. In addition, it is possible to select a file for scanning during the program start. Scanning is necessary if the user has changed the contents of this directory. The green circle shows the scan.
   
   
3. Next, you need to click on the button with file types on the right side. PAL video files cannot be played on certain TVs. Enter "NTSC" to enable content recognition (eg MPEG-PS_PAL_NTSC for avi).
4. For the mkv container, select Transcoding (Core AVC). In DLNA, you need to write MPEG-PS_PAL or MPEG-PS_NTSC (depending on the TV).
   
   
5. Then you need to go to "Categories", then select "Device". There you need to make a choice of the type and resolution of TV. Select DLNA1 or DLNA1.5. Which version is supported, you can find out in the instructions or by visiting the official website.
   
   
6. Set up Web access to the server, for which you need to go to the next item in the categories.
7. You must add your TV to the client devices. When you click on the icon with a lifebuoy, the program will automatic mode the computer name is defined, and it will be added to the "Server" section, the "Name" field. To identify devices on the network that support DLNA technology, you need to use the "Search". You need to make sure that the TV set is turned on and connected to wireless or wired networks. After the network is scanned, the program will add network clients (TV and computer).
   
   
8. You need to go into the individual settings of the TV receiver and insert the above-mentioned setup data.
   
9. The key with "File Types" will take you to the registration settings for the intended corrections.
   
   
10. You should return to the main settings window and go to the “Transcoder” category item. In the "File Format" section, you need to specify "MPEG (DVD)". In the "Video" section, select MPEG2 compression, quality 6000000. In the "Sound" section, select AC3, 448000, "Frame size" - 1280x720, 16:9. Changing the original frame size - always. Put a tick on "Complement color to frame size" and on all the boxes in the lower list.
    
11. Next, go to the tab with subtitles. Here you can customize the subtitle image style according to your own preferences and other parameters necessary for their optimal display.
    
    
12. In the final category "Advanced", check the box "Install the Windows service "Home Media Server" (UPnP)". This will facilitate the automatic loading of the program when turning on the PC as a service.
    
    

Possible problems (errors) and their solution

Possible problems when setting up the Home Media Server as a DLNA server include the following:

• Server found but not opening on media devices. Making settings in the "Home Media Server (UPnP)" will help eliminate this inconvenience. Setting the settings in the "Device" (indicate the old and new version of the model): "Authorization service" - "Russian names of the main folders" - in the "Server" section, specify the permanent port (from 1024 to 65535).
• Errors occur, stop, slow down when playing. You need to select "Transcode" for a smaller frame size and quality of video content, then stop watching the movie so that a sufficient amount of the transcoded file is formed, and set the storage of temporary transcoding files to a disk that is different from the one used for the swap file. You also need to optimize the system as a whole (disk fragmentation, a list of automatically-loaded programs).
• In some cases, an inscription may appear on the screen that the file type is not supported. After two or three restarts, everything should be fixed.

DLNA technology makes it easy to transfer files between devices connected to the Internet. The process of setting up the Home Media Server as a DLNA server is simple, the main thing is to follow the step-by-step instructions in the article exactly.

Alternative program to play video/photo/music on your TV. Any video stored on your computer is launched from the remote control. You don't need to run from a computer. During playback, your TV does all the work, and the computer acts as a network storage. This allows you to watch HDTV movies stored even on older weak computers.

(First, delete AllShare from your computer and all the "junk" files that it created next to the video files (if there were a lot of folders, it's better to search for these files by search extension name and delete them from there)

Home media server (UPnP, DLNA, HTTP)

Program website http://www.homemediaserver.ru/

latest version on the home page

Download update http://www.homemediaserver.ru/forum/viewforum.php?f=2

At the time of writing the instructions, 1.20.2 was installed and updated to 1.20.3

Edited after update to 1.42

Settings:

Run the program. Everything you see on the left is displayed on the TV. I believe that all folders should be hidden, except for "Media Resource Directories".

When you enter the "All Movies" folder on the TV, the TV starts downloading all open video files, and since there are a lot of them, it will take a lot of time each time and, as a result, will turn out to be terribly inconvenient (both in time and in sorting).

Hide folders one at a time by right-clicking and selecting Hide Folder. The same should be done for the categories "Music" and "Photo".

There are folders that cannot be hidden. In this case, I recommend deleting them.

"Settings" - "Media resources" - delete unnecessary folders and add our own, do not change the green dots

(Most users only need to add 2 folders - Desktop and My Documents)

"Settings" - "Devices" - uncheck "Auto-detect" and select the model of your TV, we do not pay attention to the year and resolution

(For example, I have "Samsung TV 2012 (DNLA, 16:9, 720x406)", "Samsung TV 2009 (DLNA, 16:9, 1920x1080)" was previously selected, but this mode could not play *.MOV)

(If you still can't open folders from the TV, return the "Auto-detect" checkbox)

"Settings" - "Server" - In the name field, enter the name you like or leave the standard one (the name of your PC)

"Settings" - "Advanced" - check the boxes "Start the program at the start of a Windows session" and "Install the Windows service "Home media server (UPnP)"

(if your PC is quite old, you have little RAM, or you are not going to change the program settings often - do not check the "Start the program at the start of a Windows session" checkbox)

"Settings" --> "Media Resources" --> "Service"

Folder "Service" --> Uncheck "Unload server", "Stop server"

Sort folder --> Uncheck "Sort folder in each media resource folder"

Folder "Bookmarks" --> Uncheck "Folder" Add bookmark "in each folder of media resources

Folder "Bookmarks" --> Uncheck "Folder" Navigation History "in the root folder of media resources

A window will pop up asking "Do you want to scan your media directories?" - click "YES" and wait for completion.

Click "Start Server", or right-click on the tray icon and select "Start Server"

Exploitation:

Adding a new movie

When you have downloaded a new movie, in order for it to appear in the list on your TV, you must perform any of the steps to restart the service. After that, the program synchronizes its list with files. From simple to complex:

Option 1: Restart your computer

Option 2: Run the program and click "Restart"

Option 3: Manually restart the "Home Media Server (UPnP)" service

Option 4: Run net stop HmsService && net start HmsService

Option 5: Create a *.bat file to restart the service. Great convenience in subsequent operation. Instructions for creating will be provided below.

Video rewind

In contrast to turning on rewind when viewing via USB, rewind when viewing via the network is slightly "cut down", namely, the standard rewind buttons do not work (only play, pause and stop). There are 2 options for rewinding

Option 1: Press the "Tools" button on the remote control and rewind in 1 minute increments, going to any point in the movie almost immediately. (This feature does not work on all TVs)

Option 2: When watching a movie, use the "Left" "Right" buttons (rewind by 10 seconds) (which navigate through the folders.

Occasionally there may be files that cannot be rewound at all (depending on codec and your TV)

File not being read

If you can't read any *.mkv file (very rare *.avi) referring to "Unsupported video codec" (this message may also pop up with an unsupported audio codec) there are solutions to the problem. (For example, my TV firmware T-MST4DEUC-1026.0 supports H.264 BP / MP / HP up to H.264, Level 4.1. H.264 FMO/ASO/RS formats are not supported)

Option 1: Use the "Transcode" function

Option 2: If "Transcoding" does not work on your TV model, select a Philips device of a suitable configuration instead of Samsung in the program settings and restart the server. In this case, the notification on the TV about the connected device will not be displayed. We go to the desired folder and the files in which the error was written will begin to open. This method is not suitable for everyone, only for those who have a more or less modern PC, because. on the PC, the process of encoding video "on the fly" is launched when viewing, and weak computers simply do not have time to process it without visible "freezing" of the video. With this method, rewind will not work, however, if you go to the transcoding folder (located in the same folder with the video file being opened) and then go to the folder with parts of the movie, you can select any piece of the file (intervals of 1 minute), at the end of the minute, another piece will not "loaded" taking a break in a couple of seconds, and everything is reproduced as it should be.

But I do not advise leaving the Philips device in the program settings, because. when viewing any video file (even one that went without problems), it will still be encoded and load the processor on the computer.

(Tested on Samsung LE32D550K1W)

Information:

The "Transcoding" function provides for on-the-fly video transcoding, etc. if it is not possible to view it in normal mode (if your TV does not support any format or codec).

In my case (Samsung TV), transcoding helps very rarely, I have to select a separate mode for each video.

Creating a *.bat file to quickly restart the service (after adding a new movie)

Since there are 2 processes running at the same time on the computer:

C:\Program Files\Home Media Server\hmssvc.exe - a service that does all the main work (for those who set the option "Install the Windows service "Home Media Server (UPnP)" in the settings

C:\Program Files\Home Media Server\hms.exe - program for managing through the interface (open folder, change settings, etc.)

We remove in the settings "Autoload the program at the start of a Windows session"

Create a text document "Server restart.txt" on the desktop

Copy the following text there

net stop HmsService && net start HmsService

On very old/weak/slow computers, where the service does not have time to finish quickly and instead of restarting it turns off the service, another option (I recommend it to everyone):

@echo off

(net stop HmsService && net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & ping localhost >nul & net start HmsService) || (ping localhost >nul & ping local

The entire command must be entered on one line (except @echo off)

Save and rename "Server restart.txt" to "Server restart.bat"

When downloading a new movie from the network / Internet, run "Restart server.bat" and after a few seconds (depending on the power of the PC and the number open files) everything will be ready

In this article, you will learn how to set up the Home Media Server program and how to access movies, music, and photos on your computer from your smart TV. If your TV supports network connection via Wi-Fi or LAN and supports the transmission of media content in real time using DLNA technology, then you should definitely take advantage of this.

Of course, you can play music and videos from a flash drive, but before that you need to transfer all the information to it. In our case, you just need to open access for the TV to any folder on your computer that stores media content.

There are branded applications from TV manufacturers, for example, LG has Smart Share, and Samsung has AllShare. Often, applications from manufacturers leave much to be desired and do not provide the necessary functionality, which cannot be said about the wonderful Home Media Server program. By the way, you can connect to the created media server not only from the TV, but also from any other DLNA client, for example, from a game console.

Before you start setting up your home media server, you need to connect your TV using the connection method available to you, usually LAN and Wi-Fi. The TV is most conveniently connected to a router, but in extreme cases it can be connected directly to a computer or laptop.

Setting up a media server.

If you still don't have a Home Media Server installed, you can always download it from our catalog.

After installing the program, open it and go to the menu "Settings".

In the left part of the window that opens, select a category "Media Resources", on the tab "Directory List" you must specify which drives (local, network, removable) and folders with media content will be available on the TV. By default, standard folders with photos, videos and music are already open.

To add the necessary folders and drives, use the button "Add". In the explorer window that opens, you just have to select the folders or drives that you want to give access to and click "OK".

When adding or deleting folders or drives, it is necessary to scan directories of media resources, usually the program itself asks for permission to scan. This will keep the list of available files up to date.

You can also configure automatic directory scanning. On the tab "Scanning" you need to check the two boxes shown in the screenshot below. Note that checking the box next to "Automatically scan directories when they change while the server is running" may slow down the speed of directory navigation from the TV.

Here we recommend checking the box before "Always use the filename as the name of the media resource", then in the list you will always see the files by their names, otherwise the TV will name the file based on its tags.

Category "Devices" in the drop down menu "Default device type" You must select the device that best matches yours. Depending on the selected device, the list of formats supported by the device will change.

If you know that your TV supports more formats than those presented in the proposed list, then you can open the settings window by clicking on the appropriate button, and in the extension fields "Movies", "Music" and "A photo" specify the required formats separated by commas.

Category "Additionally" you can set the program to start automatically and the server to start automatically when the computer is turned on. To do this, you need to check certain boxes indicated in the screenshot. It is also recommended to check the box next to "Installing the Windows Service Home Media Server (UPnP, DLNA, HTTP)", in which case the media server will run as a service.

This completes the setup of the home media server.

Now you need to run it by clicking on the button "Launch".

Now you can turn on the TV. If everything is connected correctly, then the TV icon should appear at the bottom of the program window on the tab "Playback Devices (DMR)".

If the TV does not appear, in the right part of the window, click on the button "Update". If the TV icon does not appear, then you have not properly connected the TV to your computer or home network. Most often, in more than 90% of cases, the problem occurs due to incorrect settings of antiviruses and firewalls. Disable them, if the TV icon appears, then you need to configure them correctly.

View media resources.

After setting up a home media server, there are two ways to start watching shared content.

The first, of course, by starting the playback of content from the TV, guided by the instructions for your device.

Second, start playback directly from the Home Media Server itself. First, in the main window of the program, you need to select the type of content to be played by clicking on the tab icons "Movies", "Music" or "A photo". Next, on the film we need, for example, right-click, select the item "Play to" and choose a TV. At the same time, the movie should start playing on the TV.

The Home Media Server program actually provides a huge number of all kinds of settings and offers playback of not only video, music and photos, but also Internet radio, as well as IPTV. In turn, we only considered setting up a home media server to open access to files stored on a computer for playback on a TV.